Phaesun Wind turbine 310127 310127 Scheda Tecnica

 

 

                               

                         

 

④

  Pass the lead wire through the pole.              ⑤  The pole is inserted into lower part of the clamp.              ⑥  tighten the nut to 9N.m                                                               

2.4 Hub/Blades and Generator Assembly 

                 

                   

 

 

The nosecone and accessories.                  ②Place the hub with blades onto the rotor shaft                    ③  Fully tighten the nut to 154N.m   

                                                                                and “spin” it completely onto the turbine alternator shaft,   
                                                                                then place in sequence of flat washer, spring washer and hex nut.                                                                                                                                       

 

17