ION Audio LP2CD Scheda Tecnica
15
ADJUSTING YOUR AUDIO LEVEL (optional)
1. Select your entire recording by selecting Edit, then Select…, then
click All. You can also use Ctrl+A on a PC or APPLE+A on a
Macintosh to quickly select all.
Figure 4: Select All
2. Select the Effect menu and choose the desired effect.
a. There are various types of effects which are described
further in the software’s help section as well as on the web
(See Figure 5).
b. Normalize should be used to have the correct volume on
the recording. (See Figure 6)
Please note:
It is a good idea to place the needle on the record, while it is
stopped, before you begin the recording and press ‘Play’ on
the turntable after you begin recording. If you place the
the turntable after you begin recording. If you place the
needle down while the record is spinning and after you have
began recording, there might be audible clicks and pops.
These clicks on pops might not allow the Normalize effect to
These clicks on pops might not allow the Normalize effect to
bring the volume of the recording to the level that it should
be.