ION Audio LP2CD Scheda Tecnica
25
Figure 19: Monitor Input
Figure 20: Input Level
TROUBLESHOOTING
Please contact Ion Audio or your retailer before returning
this product. See the Safety Guide for more information.
•
NO SOUND:
•
If you are not getting any sound into the software application, go back to the
preferences as shown above and make sure you have selected the USB input
for the recording device.
preferences as shown above and make sure you have selected the USB input
for the recording device.
•
If you can not hear the music but you do see the music on the screen, open
your preferences (Figure 2) and make sure that your Playback Device is set
to your internal computer soundcard.
your preferences (Figure 2) and make sure that your Playback Device is set
to your internal computer soundcard.
•
Power Cycle: Close Audacity, turn off the turntable, unplug the USB Cable.
Then plug in the USB Cable, turn on the turntable, and reopen Audacity.
Then plug in the USB Cable, turn on the turntable, and reopen Audacity.
•
If you are not able to hear any audio
as you play the record, please click on
the microphone drop-down arrow and
select Monitor Input. This will
enable you to hear the audio from the
turntable, even if you have not
record-enabled the Audacity application.
as you play the record, please click on
the microphone drop-down arrow and
select Monitor Input. This will
enable you to hear the audio from the
turntable, even if you have not
record-enabled the Audacity application.
If you are not seeing the microphone slider, please go to the Preferences
menu in Audacity, click on the Interface tab and make sure that the Enable
Mixer Toolbar and Enable Meter Toolbar options are checked. If they are
not, please check them and then press OK.
menu in Audacity, click on the Interface tab and make sure that the Enable
Mixer Toolbar and Enable Meter Toolbar options are checked. If they are
not, please check them and then press OK.
•
Check the microphone slider to make sure
that it is at full volume, all the way to the
right as shown in Figure 20:
that it is at full volume, all the way to the
right as shown in Figure 20:
If you are not seeing the microphone slider,
please go to the Preferences menu in
Audacity, click on the Interface tab and
make sure that the Enable Mixer
Toolbar and Enable Meter Toolbar
options are checked. If they are
not, please check them and then
press OK.
please go to the Preferences menu in
Audacity, click on the Interface tab and
make sure that the Enable Mixer
Toolbar and Enable Meter Toolbar
options are checked. If they are
not, please check them and then
press OK.