Benq MH740 9H.JAT77.23E Manuale Proprietario

Operation

36

3.

Press ▼ to highlight Timer Display and choose if you want the timer to show up 
on the screen by pressing ◄/►.

4.

Press ▼ to highlight Timer Position and set the timer position by pressing ◄/►.

5.

Press ▼ to highlight Timer Counting Direction and select your desired counting 
direction by pressing ◄/►.

6.

Press ▼ to highlight Sound Reminder and decide if you want to activate sound 
reminder by pressing ◄/►. If you select On, a double beep sound will be heard at 
the last 30 seconds of counting down/up, and a triple beep sound will be produced 
when the timer is up.

7.

To activate the presentation timer, press ▼ and press ◄/► to highlight On and 
press MODE/ENTER.

8.

A confirmation message appears. Highlight Yes and press MODE/ENTER on the 
projector or remote control to confirm. You will see the message “Timer is On” 
appearing on the screen. The timer starts counting when the timer is on.

1.

Go to the System Setup: Basic > Presentation Timer menu and highlight Off. 
Press MODE/ENTER. A confirmation message appears.

2.

Highlight Yes and press MODE/ENTER to confirm. You will see the message 
“Timer is Off” appearing on the screen.

Remote paging operations

Connect the projector to your PC or notebook with a USB cable prior to using the paging 

function. See 

 for details.

You can operate your display software program (on a connected PC) which responds to 

page up/down commands (like Microsoft PowerPoint) by pressing PAGE +/PAGE - on the 

remote control.

If remote paging function doesn't work, check if the USB connection is correctly made and 

the mouse driver on your computer is updated to the latest version.

The remote paging function cannot work with Microsoft

®

 Windows

®

 98 operating system. 

Windows

®

 XP or higher operating systems are recommended.

Displays the timer on screen throughout the presentation time.

Displays the timer on screen in the last 3/2/1 minute(s).

Hides the timer throughout the presentation time.

Increases from 0 to the preset time.

Decreases from the preset time to 0.