iRobot Braava 320 820060 Scheda Tecnica

16

Braava 300 Series Owner’s Manual

 

NorthStar

®

 Navigation

The NorthStar Navigation Cube acts as a beacon, emitting a signal that 

guides Braava’s cleaning. 

Connecting to the NorthStar Navigation Cube 

•   Once Braava starts cleaning, it tries to establish a connection to the 

NorthStar Navigation Cube, indicated by one flashing blue light on the 
Navigation System Indicator. Once Braava has locked onto the Cube, 
Braava’s lights turn solid blue.

•   The Navigation System Indicator also indicates Braava’s range. As Braava 

gets to the edge of its range (such as going out of the room or far from the 
NorthStar Navigation Cube) the number of lights will go down.

• 

 

Braava may occasionally drive back toward the NorthStar Navigation 
Cube to confirm its position before continuing on its cleaning path.

•   Braava builds a new map each time it starts a new cleaning cycle,  

but retains its map if paused during the cleaning cycle. 

Cleaning without a NorthStar Navigation Cube  

•   Because the Cube is just one part of the Navigation System, Braava can 

still clean without a NorthStar signal present, however the cleaning area 
will be much smaller and Braava will not be able to perform edge cleaning 
in each section.

Cleaning with multiple NorthStar Navigation Cubes: 

(For Braava 380t ONLY): 

•   Braava can use multiple NorthStar Cubes to clean up to 2,000 square 

feet when dry sweeping. Braava will move from one Cube to the next, 
extending the cleaning area with each Cube it encounters.

•  

Multiple cubes can be used in Mop mode, too, but Braava limits its wet 
cleaning area to 350 square feet to optimize for cloth wetness. 

 

Mode

Braava 320

Braava 380t

Sweep

800 sq. ft.

1,000 sq. ft.

*

Mop

250 sq. ft.

350 sq. ft.

*

up to 2,000 sq. ft. with additional NorthStar

® 

Cube (sold separately)