Assmann Wsw A 21-S1/SILVER Multipoint Connector, DIN 41617 Angled Number of pins: 21 A 21-S1/SILVER Scheda Tecnica
Codici prodotto
A 21-S1/SILVER
178
h
accessorie
s
with solderpins
Switches
USB
IEEE 1394
Powerinlets
Poweroutlets
DIN 41612
DIN 41617
Hard Metric
MiniDIN
Pin header
Female header
Sockets / Jumper
Terminal Blocks
Memory Card
connectors
FFC / FPC
Micro -
Miniature
with solderpins
Multiflex -
DIN 41651
D-Sub /
D-Sub cover /
Centronics
Modular
DIN 41612 / DIN 41617 / 2,00mm Hard Metric
DIN 41612 / DIN 41617 / 2.00mm Hard Metric
DIN 41612 (DIN EN 60603-2) Steckverbinder für ge-
druckte Schaltungen der ASSMANN WSW compon-
ents wurden seinerzeit für die Verwendung in 19´´ Zoll-
Systemen im Kontaktraster 2,54mm entwickelt. Dieses
Steckverbindersystem erfreut sich nach wie vor großer
Beliebtheit und wird aufgrund seiner Variantenvielfalt
auch in Applikationen mit hohen Polzahlen vorgese-
hen. DIN 41612 Steckverbinder stellen ein besonders
zuverlässiges und erprobtes Verbindungssystem dar,
welches über alle gängigen Anschlusstechniken z.B.:
Einlöt-, Wire Wrap und Press-Fit verfügt.
Typische Anwendungen für diese Steckverbinderfamilie
finden sich in den Anwenderbereichen der Industrie, Te-
lekommunikation, Medizintechnik, Militärtechnik, Bahn-
technik, Mess- und Regeltechnik, Automatisierungs-
und Steuerungstechnik, Luft- und Raumfahrttechnik,
Computertechnik und vielen weiteren Bereichen.
ASSMANN WSW components deckt nahezu das ge-
samte Spektrum an Bauformen ab wie B,B1/2, C,C1/2,
R,R1/2, Q,Q1/2 und M ab. Neben den Standardproduk-
ten liefert die ASSMANN WSW components auch eine
Vielzahl an kundenspezifischen Lösungen und Sonder-
bestückungen. Hochtemperaturisolierkörpervarianten
und Clipversionen zum Fixieren der Steckverbinder auf
der Leiterplatten vervollständigen die Produktpalette.
Die Einpresstechnik wird über das wohlbekannte `Na-
delöhr´ Kontaktdesign realisiert.
Aus dem Hause ASSMANN WSW components sind
weiterhin die traditionellen Steckverbinder nach DIN
41617 im Raster 2,50mm erhältlich, die einst die Vor-
gänger der o.g. DIN 41612 Steckverbinderfamilie wa-
ren. Dieses Steckverbindersystem zeichnet sich durch
seine erprobte „Robustheit“ aus. Steckverbinder nach
DIN 41617 können in drei Polzahlen, 13-, 21-, und 31-
polig, sowohl als Stift- als auch als Federleisten gelie-
fert werden. Hauptsächlich kommt hier die versilberte
Ausführung zum Einsatz.
DIN 41612 (DIN EN 60603-2) connectors for printed
circuits of ASSMANN WSW components have been
developed as connectors component for 19´´ inch sy-
stems with a contact pitch of 2.54mm. Today, this con-
nector family is well-known and still used on high volu-
me applications due to the full range of products and the
wide range of available pin counts. Key characteristics
of this DIN 41612 product range are high reliability and
the availability many different contact technologies
eg. : THT, Wire-Wrap and Press-fit.
Typical applications for this connector system are to be
found in the field of industry, telecom, medicine, military,
trains, measurement and instrumentation, automation,
control devices, aerospace and computers and many
other areas.
ASSMANN WSW components offers the complete ran-
ge of DIN 41612 connectors like style B, B1/2, C, C
1/2, R,R1/2, Q, Q1/2 and style M. Beside standard pro-
ducts ASSMANN WSW components deliver a variety
of custom specific solutions, customer specific contact
loadings, high temperature insulators and board locks.
The design of the press-fit contacts is based on the
well-known `eye of the needle´ - design.
ASSMANN WSW components also the traditional-
ly DIN 41617 connectors based on 2.50mm contact
pitch. Known as the forerunner of the DIN 41612, this
connector system still shows a solid robustness and is
used in today applications. These connectors can be
delivered in three different pin counts as there are 13,
21, and 31 contacts, as male and/or female connector.
The commonly used plating is based on silver surface.