Renkforce A 1000 Hi-Fi Amplifier 29265c10 Scheda Tecnica

The Renkforce amplifier A-1000 is used to amplify low-level audio signals in home audio systems; it is swit-

ched between the signal source to be amplified and the speakers.
The amplifier must only be controlled by a low-level audio source.
This product is only approved for connection to 230 V/50 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be

avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,

fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.

 The lightning symbol in a triangle warns against unprotected live components or elements inside

the housing or „live“ connection points. Touching these components or connection points may

pose a danger to life.

Lines must only be connected to such connection points by specialists, or lines ready for con-

nection must be used.

The device contains no parts that require servicing by the user. Therefore, never open the de-

vice.

 The  exclamation  mark  symbol  indicates  that  the  user  must  read  these  operating  instructions

before commissioning of the device, and observe them during operation.

 The arrow symbol indicates special advice and operating information.

•  Amplifier
•  Remote Control
•  Batteries
•  Operating Instructions