Renkforce A 1000 Hi-Fi Amplifier 29265c10 Scheda Tecnica

There is distortion:
•  The amplifier input receives an excessive signal.
•  The volume is set too high, the speakers distort.
•  The sound controllers for bass and treble are turned up too far.
•  The control source is a high-level device and has been connected to the phono input of the amplifier

incorrectly.

Playback has no bass share:
•  One speaker is connected the wrong way.
•  The BASS controller (15) on the amplifier is set to minimum.

Playback has no treble share:
•  The TREBLE controller (14) on the amplifier is set to minimum.

Supply voltage: .................................................. 230 V/50 Hz
Power consumption:.......................................... 100 W
Loudspeaker impedance: ................................. 6-8 Ohm
Input sensitivity/impedance: ............................ Line

250 mV/47 kOhm

Phono

2.5 mV/47 kOhm

Output power: ..................................................... 2 x 50 W at 6 Ohm
Total harmonic distortion: ................................. <0,05 %
Frequency response: ......................................... 20-20000 Hz (+1/-2 dB)
S/N ratio:.............................................................. Line

70 dB(A)

Phono

60 dB(A)

Channel separation:........................................... 60 dB
Sound controller:................................................ Bass

+/-10 dB/100 Hz

Treble

+/-10 dB/10 kHz

Dimensions:......................................................... 420 x 135 x 215 mm
Weight: ................................................................. 6.2 kg