Fujitsu fi-6110 PA03607-B061 Scheda Tecnica

Chapter 9 Operational Settings

149

Select a detection method.

None

Does not detect multifeeds.

Check
Overlapping
(Ultrasonic)

Detects multifeed by the overlapping of 
documents.
When this is selected, you can also specify the 
two following options:
z Specify the detection range by the length from 

the leading edge of the document.
Proceed to 

 for more details.

z Ignore the multifeed when there is paper of the 

same size attached to a designated location 
on the page.
Proceed to 

 for more details.

Check Length

Detects multifeed by the difference in length of the 
documents.
Note that multifeeds cannot be detected 
accurately when scanning a mixed batch of 
different sizes.

Check 
Overlapping 
and Length

Detects multifeed by the combination of [Check 
Overlapping (Ultrasonic)] and [Check Length].
Note that multifeeds cannot be detected 
accurately when scanning a mixed batch of 
different sizes.

Length

Select a length difference from 10/15/20 mm. 
Any length under the specified value will not be 
detected as multifeed.

z To scan documents with different lengths, specify 

[Check Overlapping (Ultrasonic)].

z When a photo or a piece of paper is attached on the 

document, the overlapping part of the document may 
be falsely detected as multifeed if [Check Overlapping 
(Ultrasonic)] is specified. In that case, specify [Check 
Length].
Note however that [Check Overlapping (Ultrasonic)] 
can be used if you restrict the detection range.

z Multifeed cannot be detected when using the Carrier 

Sheet.

This setting can also be configured from the scanner 
driver's setup dialog box. Note that priority is given to the 
scanner driver setting.