Renkforce Wireless Surveillance Kit808578 Resolution (TVL) 420 TVL 808578 Scheda Tecnica

Codici prodotto
808578
Pagina di 144
43
 
b) Mains Adapters
•  The mains adapters are constructed pursuant to protection category II.
•  Only connect the mains adapters to proper mains sockets of the public mains.
•  The mains sockets for both plug-in mains adapters must be clear the DVR or radio camera and
easily accessible.
•  The plug-in mains adapters are only designed for use in dry, enclosed inner rooms; they must
not become damp or wet. There is danger to life from electric shock!
•  Do not pull the plug-in mains adapter from the mains socket by pulling the cable.
•  Protect the cables of the plug-in mains adapters from sharp edges, do not stop on them.
•  If a mains adapter is damaged, do not touch it. Danger to life from electric shock!
 
  First deactivate all sides of the mains socket to which the plug-in mains adapter is connected 
(e.g. switch off the respective fuse or turn out the fuse. Then deactivate the associated FI pro-
tection switch). 
 
  Only then pull the plug-in mains adapter from the mains socket and take the product to a spe-
cialist workshop.
•  Only use the enclosed plug-in mains adapters for operation of the DVR and radio camera. In
case of defects of a plug-in mains adapter, replace it with a stabilised plug-in mains adapter of 
the same build with the same technical data (voltage/current).
 
c) DVR
•  The DVR is only suitable for dry, closed rooms. Do not expose it to direct sunlight, dust, dirt,
heat, cold, dampness or wetness; otherwise, it will be damaged.
•  Only put up the DVR on a stable, level surface.
•  Never cover the ventilation slots. Therefore never put the DVR onto carpets, etc.
•  Never place any objects on the DVR.
 
d) Radio Camera
•  The camera is suitable for indoor and outdoor use (IP65). However, it must never be operated
in or under water; it would be destroyed by this.
•  The connection plug at the camera‘s power supply cable is not water-proof or water-tight and
therefore must be in the dry indoor area (e.g. of a suitable connection box).
•  The radio camera must not be exposed to extreme temperatures, intense vibration or heavy
mechanical strain. 
•  Ensure that the connection cable is not crushed, bent or damaged by sharp edges.
•  The operation of this radio camera is no substitute for your responsibility to supervise children
or other people in need of special care. It only serves as a support.
•  Install the radio camera so that it does not point right at bright light sources (e.g. the sun or
spotlights). This will not only cause an overmodulated and useless image, but also may damage 
the image sensor it permanently exposed.