Brother HL-6180DW Scheda Tecnica
133
Troubleshooting
6
Out of Memory
Secure Print Data
is full.
The machine’s memory is full.
Press Cancel and delete the previously stored
secure print data.
secure print data.
Out of Memory
Add more Memory.
The machine’s memory is full.
Reduce the complexity of your document or reduce
the print resolution.
the print resolution.
Add more memory. (see Installing extra memory
uu
uu
Print Unable ##
The machine has a mechanical
problem.
problem.
Turn the power switch off, wait a few minutes, and
then turn it on again.
then turn it on again.
If the problem continues, call your Brother dealer.
Replace Drum
It is time to replace the drum unit.
Replace the drum unit. (See Replacing the drum unit
uu
uu
The drum unit counter was not reset
when a new drum was installed.
when a new drum was installed.
Reset the drum unit counter. (See Replacing the
drum unit uu page 112.)
drum unit uu page 112.)
Replace Fuser
It is time to replace the fuser unit.
Call your Brother dealer or a Brother Authorized
Service Center to replace the fuser unit.
Service Center to replace the fuser unit.
Replace Laser
It is time to replace the laser unit.
Call your Brother dealer or a Brother Authorized
Service Center to replace the laser unit.
Service Center to replace the laser unit.
Replace PF Kit1
Replace PF Kit2
Replace PF KitMP
It is time to replace the paper
feeding kit.
feeding kit.
Call your Brother dealer or a Brother Authorized
Service Center to replace the PF kit.
Service Center to replace the PF kit.
Replace Toner
The toner cartridge is at the end of
its life. The machine will stop all print
operations.
its life. The machine will stop all print
operations.
Replace the toner cartridge. (See Replacing the toner
cartridge uu page 105.)
cartridge uu page 105.)
Size Error DX
The paper size defined in the printer
driver and the control panel menu is
not available for automatic duplex
printing.
driver and the control panel menu is
not available for automatic duplex
printing.
Press Cancel. Choose a paper size which is
supported by the duplex tray.
supported by the duplex tray.
The paper size you can use for automatic duplex
printing is A4.
printing is A4.
The paper in the tray is not correct
size and is not available for
automatic duplex printing.
size and is not available for
automatic duplex printing.
Load the correct size of paper in the tray and set the
size of paper to the tray. (See Paper Tray
uu
size of paper to the tray. (See Paper Tray
uu
The paper size you can use for automatic duplex
printing is A4.
printing is A4.
Size Mismatch
The paper in the indicated tray is not
the correct size.
the correct size.
Put the same size paper in the paper tray that is
selected in the printer driver, and then press Go, or
select the size of paper that you loaded in the
indicated paper tray.
selected in the printer driver, and then press Go, or
select the size of paper that you loaded in the
indicated paper tray.
Storage Full
There is no space on the ROM.
Press Cancel or Go. Delete unnecessary macros or
fonts. (See Delete Storage uu page 80.)
fonts. (See Delete Storage uu page 80.)
Toner Low
If the LCD shows Toner Low you
can still print; however, the machine
is telling you that the toner cartridge
is near the end of its life.
can still print; however, the machine
is telling you that the toner cartridge
is near the end of its life.
Order a new toner cartridge now so a replacement
toner cartridge will be available when the LCD shows
Replace Toner.
toner cartridge will be available when the LCD shows
Replace Toner.
Error message
Cause
Action