Keba 86.875 Electric Cars KEBA 86.875 Electric Cars N/A Silver, Grey Silver, Grey 86.875 Scheda Tecnica
Codici prodotto
86.875
KeContact P20
Using the charging station
User manual, Version: 1.30 / Article no.: 90061
15
© KEBA 2012-2013
3.6 Installing/removing the cylinder lock
Cylinder lock with key
General
Device versions with a key switch are standard
fitted with a cylinder lock. If needed, the cylinder
lock can be replaced according to the following
instructions.
Device versions with a key switch are standard
fitted with a cylinder lock. If needed, the cylinder
lock can be replaced according to the following
instructions.
Profile half cylinder – dimensions in millimeters
Requirements
The cylinder lock must fulfill the following re-
quirements:
The cylinder lock must fulfill the following re-
quirements:
Profile half cylinder according to EN 1303 or
DIN 18252
Dimension
A = 30 mm (for A=31 mm a min-
imal overhang occurs on the housing)
Adjustable lock nose
Preparing the cylinder lock
Preparing the cylinder lock
►
Adjust the angle of the lock nose [S] so
that it faces up vertically when the key is
in the removal position.
that it faces up vertically when the key is
in the removal position.
Adjusting the lock nose
Adjusting the lock nose
►
The adjustment of the lock nose angle
normally occurs as follows:
Use a thin object to press in the code pin
and push the lock nose into the desired
position.
normally occurs as follows:
Use a thin object to press in the code pin
and push the lock nose into the desired
position.