Nkk Switches M2023SS1W01 3A Miniature Toggle Switch, , 250Vac M2023SS1W01 Scheda Tecnica

Indicators

Accessories

Supplement

Tactiles

Keylocks

Rotaries

Pushbuttons

Illuminated PB

Slides

Programmable

Rockers

Touch

Tilt

 

A

Toggles

General 

Specifications

Electrical Capacity (Resistive Load) 

 

Power Level (silver):  6A @ 125V AC & 3A @ 250V AC 

 

  4A @ 30V DC for On-None-On & On-None-Off; 3A @ 30V DC for all other circuits 

 

Logic Level (gold):   0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

 Logic/Power Level (gold over silver):    Combines silver & gold ratings  
 

  Note:  Find additional explanation of dual rating & operating range in Supplement section.

 

Contact Resistance:   10 milliohms maximum for silver; 20 milliohms maximum for gold

Insulation Resistance:   1,000 megohms minimum @ 500V DC

 

Dielectric Strength:   1,000V AC minimum between contacts for 1 minute minimum;  

 

  1,500V AC minimum between contacts and case for 1 minute minimum

 

Mechanical Life:   100,000 operations minimum; 50,000 operations minimum for flat, locking & splashproof devices

 

Electrical Life:   25,000 operations minimum for silver; 50,000 operations minimum for gold;  

 

  50,000 operations minimum for silver at 3A @ 125V AC

 

Angle of Throw:   25°

 

Toggle:  Brass with chrome plating 

 

Frame:  Stainless steel

 

Bushing:  Brass with nickel plating 

 

Support Bracket:  Brass with tin plating

 

Case:  Diallyl phthalate resin (UL94V–0)

 

Movable Contactor:  Phosphor bronze with silver or gold plating

 

Movable Contacts:  Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A)

 

Stationary Contacts:  Silver with silver plating (code W); copper or brass with gold plating (code G); 

 

  or silver with gold plating (code A)

 

Terminals:  Copper or brass with silver plating; or copper or brass with gold plating

 

Operating Temp Range:   –30°C through  +85°C (–22°F through +185°F)

 

Humidity:   90 ~ 95% humidity for 96 hours @ 40°C (104°F)

 

Vibration:   10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning  

 

  in 1 minute; 3 right angled directions for 2 hours

 

Shock:   50G (490m/s

2

) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)

 

Sealing:   Splashproof bushing options B3, D3, D8, L3, & L8, which have o-rings inside & outside the 

 

  bushing, meet IP67 of IEC60529 Standards.

 

Mounting Torque:   3.0Nm (26.55 lb

•

in) double nut for large bushing; 

 

  1.5Nm (13 lb

•

in) double nut & 0.7Nm (6 lb

•

in) single nut for all other bushings

 

Soldering:   Wave Soldering (PC version) for Gold:  See Profile A in Supplement section.  

 

  Manual Soldering for Gold:  See Profile A in Supplement section.  

 

  Wave Soldering (PC version) for Silver:  See Profile B in Supplement section. 

 

  Manual Soldering for Silver:  See Profile B in Supplement section.   

 

  Note:  Lever must be in OFF (center) position while soldering.

 

Cleaning:   These devices are not process sealed.  Hand clean locally using alcohol based solution.

 

Flammability Standards:  UL94V–0 for case

 

UL:  File No. E44145 

 

  All models recognized at 6A @ 125V AC, 3A @ 250V AC or 0.4VA maximum @ 28V DC maximum.  

 

  Add “/U” to end of part number to order UL mark on switch. 

 

  Add “/CUL” to end of part number to order cULus mark on switch.

 

CSA:  File No. 023535_0_000 

 

  All models recognized at 6A @ 125V AC or 3A @ 250V AC or 0.4VA maximum @ 28V maximum.  

 

  Add “/C” to end of part number to order CSA mark on switch.