Aei DigiSender X7 DG440 Advanced Wireless Video Sender System, N/A, DG440 Scheda Tecnica
Codici prodotto
DG440
Page 7
Please read this instruction manual carefully prior to installation
DG440 - DigiSender® X7
continued...
ENGLISH
STEP 4
STEP 5
STEP 6
STEP 7
Ensure that both the A/V Channel and IR
Channel are set to 1.
See the trouble shooting sections for further
information on the channel selection process.
Channel are set to 1.
See the trouble shooting sections for further
information on the channel selection process.
Connect the IR Systeme Technik™ IR Emitter to
the socket labelled IR on the rear of the
transmitter. Follow the steps overleaf to install the
IR Systeme Technik™ IR Emitter.
the socket labelled IR on the rear of the
transmitter. Follow the steps overleaf to install the
IR Systeme Technik™ IR Emitter.
Connect the power supply unit to the socket
labelled PSU.
labelled PSU.
Connect the power supply unit (PSU) into an
available wall socket.Press the POWER button on
your DigiSender remote control to switch the
transmitter on.
available wall socket.Press the POWER button on
your DigiSender remote control to switch the
transmitter on.
LIVING
ROOM
LIVING
ROOM
LIVING
ROOM
LIVING
ROOM
Avoid positioning the transmitter near to 2.4GHz wireless enabled devices
such as modern games consoles, wireless controllers, laptops, DECT phones
or wireless networking equipment.
such as modern games consoles, wireless controllers, laptops, DECT phones
or wireless networking equipment.