Moxa Technologies Network Cables 1100 Dépliant

 

— 1 — 

— 2 — 

— 3 — 

The UPort 1100 Series is part of Moxa’s UPort Line of USB-to-Serial 
adaptors. The UPort product line provides a wide range of easy-to-use 
solutions for adding Windows COM ports and Linux tty ports through a 
PC’s USB port. The UPort 1100 series includes the following models: 

UPort 1110:  1-port RS-232 USB-to-Serial Adaptor 
UPort 1130:  1-port RS-422/485 USB-to-Serial Adaptor 
UPort 1150:  1-port RS-232/422/485 USB-to-Serial Adaptor 
UPort 1150I: 1-port RS-232/422/485 USB-to-Serial Adaptor   

w/ Isolation Protection. 

ATTENTION 
Before plugging the adaptor into your computer’s USB port, we 
recommend installing the driver first. Please refer to Section 3 for driver 
installation procedures. 

After the driver is installed, the adaptor can be plugged into any 
upstream type A USB port, either on a PC host or on an upstream hub. 
The adaptor is hot-pluggable, so there is no need to power down your 
computer prior to installation. The Found New Hardware wizard will 
automatically locate the appropriate drivers, and various windows will 
appear as the adaptor is being installed. 

After the Found New Hardware wizard finishes installing the adaptor, 
the Windows Device Manager may be used to modify the settings for 
the new COM port. The new COM port will be listed under Ports 
(COM & LPT) and the new adapters will be listed under Multi-port 
serial adapters. For more information about port configuration, please 
refer to the UPort 1100 Series user manual. 

 

 

 

 

 

 

2. Package Checklist 

Before installing the adaptor, please verify that the package contains 
the following items:   
y  UPort 1100 Series USB-to-Serial Adaptor 
y  UPort Documentation and Software CD-ROM 
y  UPort 1100 Series Quick Installation Guide 
y  5-year Warranty Statement 
The UPort 1130/1150/1150I will also come with the following item: 
y  Mini DB9F-to Terminal-Block Converter 
NOTE: Please notify your sales representative if any of the above items 
are missing or damaged. 

The following instructions and screenshots are from a PC running 
Windows XP(32-bit), but the same instructions apply for Windows 
98/ME/2000 and Windows XP/2003/Vista (32-bit and 64-bit). 

1.  Run Setup.exe, located on the Documentation and Software 

CD-ROM. Click on Next to begin installing the driver.   

 

2.  Click on Next to install the driver in the indicated folder.   

 

3.  Click on Install to proceed with installation.   

 

4.  The next window cautions you that this software has not passed 

Windows logo testing. This is a standard warning, and Moxa has 
thoroughly tested the driver for safe Windows operation. Please 
click Continue Anyway to proceed.   

 

5.  A window will appear indicating that all files have been installed. 

Click Finish.  

4. Installing the Hardware 

1.  Plug the adaptor into any upstream USB port (e.g., a USB port on 

your computer). Windows are done with hardware installation at this 
point and may continue on to port configuration. Windows will 
auto-detect the UPort cable and show Found New Hardware in the 
System Tray. 

 

2.  The following window will appear. Select No, not this item click 

Next.