Neuro Logic Systems 1U 17" & 19 LCD and Sun Keyboard Manuale Utente
RFT2 Rack Kit Installation Guide
07/01/06 Rev 1.0
Page 3 of 13
Hardware Installation
Step Detail
1.
The following instructions assume that your
equipment rack utilizes caged nuts. If you rack
has pre-tapped holes there will be no need to
include the caged nuts and the size of the
mounting bolts may vary from that described.
equipment rack utilizes caged nuts. If you rack
has pre-tapped holes there will be no need to
include the caged nuts and the size of the
mounting bolts may vary from that described.
Determine the vertical location for the
LCD/keyboard in the rack. Mark the location
with tape or a pencil. This product requires
one rack unit (1
LCD/keyboard in the rack. Mark the location
with tape or a pencil. This product requires
one rack unit (1
”) of vertical space. Mount
the LCD/keyboard at a convenient height for
an average user. (Approx 44” from floor)
an average user. (Approx 44” from floor)
2. Measure the distance from the front rack mounting
rail to the rear rack mounting rail. (This distance will
be needed during installation of the Rear slide
mounting brackets in step 4)
be needed during installation of the Rear slide
mounting brackets in step 4)
Distance= _____________
Ensure the bottom of the kit is properly positioned in a
rack unit
rack unit