TROY Group Print Server PocketBasic Manuale Utente
User’s
Guide
Document #40182-120 Rev. A
8
Microsoft Windows Network Configuration
The following configuration procedures are designed for Windows
95/98/ME/2000/NT/XP/2003 Server operating systems.
95/98/ME/2000/NT/XP/2003 Server operating systems.
1. Insert the CD supplied with your print server, click on Install
Software, and then click on Install ExtendView. Follow the on-
screen instructions to complete this installation.
screen instructions to complete this installation.
2. Start the ExtendView utility by clicking on Start, Programs, TROY
GROUP, and then ExtendView.
3. When you get the Welcome screen, click on Next, choose any name
for your View Name, select Automatically create a view with default
settings, and then click on Finish.
settings, and then click on Finish.
4. Double-click on the print server that you want to print to in the list.
5. If you are using TCP/IP (recommended for Windows printing) and
you do not have a DHCP server (see note below), you will need to
manually assign a valid IP Address (if you are not sure what IP
address is valid, ask your network administrator), and click on OK.
manually assign a valid IP Address (if you are not sure what IP
address is valid, ask your network administrator), and click on OK.
NOTE: If you are using DHCP on your network, the print server may
have acquired valid IP settings at this point and no further
configuration is necessary. This might work well if your DHCP server
allows the print server to keep this address permanently, but in most
cases, you will want to use a static address outside the range reserved
for DHCP (see your DHCP server documentation for details). When
you configure your printer port, the print server will go to a static IP
address. To assign a static IP address, right-click on the print server in
the menu, and then select Configuration. On the TCP/IP tab, under IP
Address Resolution, select Set Permanent, and assign a valid static IP
address for your network. Click on OK to save the new settings.
have acquired valid IP settings at this point and no further
configuration is necessary. This might work well if your DHCP server
allows the print server to keep this address permanently, but in most
cases, you will want to use a static address outside the range reserved
for DHCP (see your DHCP server documentation for details). When
you configure your printer port, the print server will go to a static IP
address. To assign a static IP address, right-click on the print server in
the menu, and then select Configuration. On the TCP/IP tab, under IP
Address Resolution, select Set Permanent, and assign a valid static IP
address for your network. Click on OK to save the new settings.
6. To install the ExtendConnect IP Port Monitor, insert the CD supplied
with your print server, click on Install Software, and then click on
Install ExtendNet Connect for TCP/IP. Follow the on-screen
instructions to complete this installation.
Install ExtendNet Connect for TCP/IP. Follow the on-screen
instructions to complete this installation.
7. Install the printer driver software according to the documentation for
the printer.