Wacom Intuos - 5 Manuale Utente

83

83

POWER SAVING FEATURES

When configured for wireless operation, Intuos5 uses a number of power saving features to conserve the 
tablet battery charge and improve performance.

Important: Conserve battery power by turning off the wireless module when you are not using the 
tablet.  Push the power button on the wireless module to turn it off.  Otherwise, the tablet battery 
may need charging before you can again use the tablet wirelessly.  See 

.

Power saving mode

Tablet enters power saving mode after 2 minutes of no user input.  The time 
parameter can be adjusted in the Wacom Tablet control panel.  See 

Depending on your tablet model, wake from power saving mode by touching the 
tablet, pressing an ExpressKey, or placing the pen in proximity.

Sleep mode

Tablet enters sleep mode:

•

When there is no wireless connection for more than 4 seconds.  For example, 
you switch off the computer, move the tablet out of range, or unplug the 
wireless receiver.  To resume operations, correct any problem and ensure the 
tablet is within range of your computer.  Then press the power button on the 
Wacom wireless module.  See 

.

•

After 30 minutes of no user input.

•

When the battery level is extremely low.  Recharge the battery immediately.

To wake from sleep mode, first press the Touch Ring toggle button or the power 
button on the wireless module.  Depending on your tablet model, touch the tablet 
surface with your finger or the pen.  Then move your finger or pen along the 
tablet to fully activate Intuos5.