Inter-Tel CS-5400 Manuale Utente

Pagina di 392
System Features
INTER-TEL
® 
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Trunk Access Codes
Page 119
Trunk Access Codes
These feature codes are used for selecting trunks when placing outgoing calls.
Endpoint Feature Codes
The following pages list the general feature codes. When a default feature button can be used
in place of the feature code, it is indicated at the end of the explanation. Refer to 
 for a
listing of the default endpoint feature buttons.
 
Table 18. 
Trunk Access Codes 
FEATURE NAME
CODE 
US/EUROPE
DEFINITION
Automatic Route Selection 
(ARS)
92000*
Allows the system to select the desired route for 
placing a call, as programmed in the database.
Trunk Group Access 1–208
92001–
92208*
Selects an available trunk from a programmed 
group of trunks for placing an outside call.
Emergency Call
911/
999 or as 
applicable
Entering this feature code selects an outgoing 
trunk and automatically dials the programmed 
Emergency Call number, which is routed by 
default out Trunk Group 1. 
CAUTION: IP and SIP endpoints at remote sites 
require gateway trunks, gateways, and appropri-
ate programming to reach their local emergency 
responders. 
Outgoing Call
8
Selects an outgoing trunk according to the pro-
grammed outgoing access mode for that end-
point. Inter-Tel endpoints use the OUTGOING 
button or a Call button.
Table 19. 
Endpoint Feature Code Definitions
FEATURE NAME 
CODE 
DEFINITION 
Account Code – All Calls Follow-
ing
391
Allows the endpoint user to enter a forced or 
optional account code that will apply to all 
calls following the entry of this feature code 
and will appear in the SMDR. To disable the 
All Calls Following feature, the feature code is 
entered again without an account code.
Account Code – Optional
390
Allows the endpoint user to enter an optional 
account code for SMDR reports during an out-
side call.
ACD Agent Login
ACD Agent Logout
ACD Agent Login/Logout Toggle
326
327
328
These feature codes allow an ACD hunt group 
member (agent) to log into and out of the ACD 
hunt group(s). The agent will only receive calls 
through the ACD hunt group(s) while logged 
in.
ACD Agent Wrap-Up Terminate
329
When an ACD agent completes a call, no 
other ACD hunt group call will ring at the end-
point until the ACD Wrap-Up Timer expires or 
the agent enters this feature code to terminate 
the wrap-up session.