Inter-Tel CS-5400 Manuale Utente

Page  176

Handsfree Enable/Disable

 button, or 

 button. If the endpoint does not have an 

 button, the call

will appear under a Call button. In the default database, all single line endpoints have this fea-
ture enabled.

Inter-Tel endpoints: While on-hook, enter the Ring Intercom Always On/Off feature
code (377). The display shows RING IC ALWAYS ON (or OFF).

Single line endpoints: Lift the handset. Enter the Ring Intercom Always On/Off fea-
ture code (377).

An Inter-Tel endpoint user can always receive private calls by disabling the endpoint Hands-
free Answering feature using the Handsfree On/Off feature code, as described in the following
paragraph. The endpoint user hears repeating double tones when receiving an intercom call. To
answer while Handsfree Mode is disabled, the user must lift the handset or press the Speaker,

, or 

 button.

While on-hook, enter the Handsfree On/Off feature code (319). The display shows
HANDSFREE MODE ON (or OFF).

If you hear a double tone and a call announcement (handsfree call), and the Speaker
button is lit, respond handsfree or lift the handset. (Display endpoints show 

 TO

(username) to identify the source of the call.)

If you hear repeating double tones (private call), lift the handset, or press the Speaker,

, or 

 button to respond handsfree. (Display endpoints show INTER-

COM CALL FROM <username> to identify the source of the call.)

Model 8660 or 8662: Instead of answering the call, you may press one of the fol-
lowing menu buttons:

— SEND TO V-MAIL: This option appears only if you have a Voice Mailbox.

Pressing this button sends the call directly to your mailbox greeting.

— IC CALL TO DND: Pressing this button sends Do-Not-Disturb tones to the

caller and allows you to program a Do-Not-Disturb message. If using a display
endpoint, the caller sees DO-NOT-DISTURB. For detailed instructions about
using Do-Not-Disturb, refer to 

.

When you hear repeating double tones, lift the handset.

To receive a transferred-to-hold intercom call:.

Inter-Tel endpoints: When the 

 button (or Call button) is fluttering and the dis-

play shows <calling endpoint> TFR FROM <transferring endpoint>, lift the handset
and press the 

 button (or Call button). Or, while on-hook, press the 

 but-

If the endpoint does not have an 

 button, the call will appear under a Call

button.