Inter-Tel CS-5400 Manuale Utente

Placing a Conference Call

Page 203

  1.

Press the 

 button, or press the Special button and enter the Conference feature

code (5). The party is on conference wait hold (hears music) and the 

 button

flutters. The display shows CALL NEXT PARTY TO CNF.

  1.

Hookflash and enter the Conference feature code (5). The party is on conference wait
hold (hears music). 

  2.

Place an intercom or outside call to another party (or return to a call on hold) to be
included in the conference. Users of Executive and Professional Display phones and
Model 8560 phones can press the IC DIRECTORY or OUTSIDE DIR menu buttons to
look up numbers, if desired..

To place the party on conference wait hold with an Inter-Tel endpoint: 

Press the 

 button again. Or, press the Special button and enter 5 again. 

To place the party on conference wait hold with a single line endpoint: 

Hookflash and enter the Conference feature code (5). The party is on conference
wait hold (hears music). 

  3.

Repeat step 2 until all desired parties are on conference wait hold (or the maximum
allowed number has been reached).

  4.

Connect all waiting parties in the conference:

Press the 

 menu button. All parties are connected.

The display shows CNF IN PROGRESS. The CNF button and a Call button flash
slowly. Use the following menu buttons:

HOLD: Press this button to place the conference on hold.

DISCONNECT: Press this button to remove your endpoint from the conference.
If there are no other endpoints in the conference, all parties are disconnected. If
there is still another endpoint in the conference, the parties remain connected.

ADD PARTY: This button appears only if you have not reached the maximum
number of allowed parties. Press this button to leave the conference parties con-
nected while you place another call to be added to the conference.

MUTE: Press this button to switch the microphone on or off during the confer-
ence.

TRANSFER CNF: Press this button and enter an extension number to transfer
the conference to another endpoint or the Voice Mail application.

To connect all waiting parties in the conference with another type of Inter-Tel
endpoint: 

Press the 

 button again. Or, press the Special button and enter 

 again.

All parties are connected. Display endpoints show CNF IN PROGRESS. The

 button and a Call button flash slowly. 

An existing conference is not a valid “party” for another conference.