Inter-Tel CS-5400 Manuale Utente

Page  226

Viewing Station Speed Dial Numbers

To program Station Speed Dial numbers at a single line endpoint:.

  1.

Lift the handset and enter the Program Station Speed Dial feature code (383). You hear
a confirmation tone.

  2.

Dial the Speed Dial location code (0–9). If you hear reorder tones, you entered an
invalid speed dial location code; try again.

  3.

Do one of the following: 
 •

To enter or change a number: Dial the extension number or phone number (up
to 16 digits, including pauses and hookflashes) to be stored. To include *, #, a
hookflash, or a pause in the number, hookflash once for an asterisk (*), twice for a
pound (#), three times for a hookflash, or four times for a pause. If you make a
mistake, press 

 to leave the number unchanged; then start over at step 1.

 •

To erase an existing number and leave it blank: Overwrite the existing number
by entering only a hookflash as the new number.

  4.

Hang up to exit. Repeat these steps for each additional number to be stored.

  1.

While on-hook, enter the Review Keys feature code (396). The display shows PRESS
THE KEY TO REVIEW. Press the desired Speed Dial button. The display shows the
currently stored number and name.

  2.

After viewing the number, press the Speaker button, 

, or 

 to exit, or wait for the

display to return to date and time.

  1.

While on-hook, enter the Program Station Speed Dial feature code (383). The display
shows PROGRAM STN SPD # (0–9) OR SCROLL. Do one of the following:
 •

Use a location code: Dial the desired Speed Dial location code (0–9). When the
name is displayed, press 

 or 

 to view the number.

 •

Scroll through the displayed numbers: Scroll to the desired number by pressing
the Volume, 

, or 

 button. The name and number are displayed for

each location.

 •

Use the Executive or Professional Display or the Model 8560 phone menu:
Use the menu buttons to select the desired Speed Dial location. When the name is
displayed, press 

 or ACCEPT to view the number.

  2.

After viewing the number, press the Speaker button, 

, or 

 to exit, or wait for the

display to return to date and time.

  1.

Lift the handset. (Inter-Tel endpoints can remain on-hook.)

  2.

If placing an outside call, select an outgoing trunk or use ARS. If placing an intercom
call or if the outside number contains a trunk access code, skip this step.

  3.

Hookflash and enter the Station Speed Dial feature code (382). You hear a confirmation
tone. Then dial the location code (0–9). The number is dialed.

If you make a mistake, press 

; then start over. The number in memory

remains unchanged.