Inter-Tel CS-5400 Manuale Utente

Page  242

Default Endpoint

  3.

Enter the extension to be forwarded. If you have a display, it shows ENTER PASS-
WORD. If you entered an invalid extension number, you will hear reorder tones and can
try again.

  4.

Enter the extension’s password, followed by 

. If you have a display, it shows ENTER

FEATURE CODE.

  5.

To turn on Call Forward: 

a.

Enter one of the following Call Forward feature codes. If you entered an invalid
feature code, you will hear reorder tones and can try again.

Call Forward All Calls

355

Call Forward If Busy 

357

Call Forward If No Answer

356

Call Forward If No Answer/Busy

358

a.

Enter the forwarding destination. This can be an extension number or a trunk
access code followed by an outside phone number.

If the forward destination is an extension number, programming is complete, and
the call is disconnected automatically.

If the forward destination is an outside number, hang up to complete program-
ming. 

If the station is not permitted to forward to the destination entered, you will hear
reorder tones and can try again.

If you hang up before entering a forward destination, the programmed forward
is canceled.

  6.

To turn off Call Forward: Enter 355 and then hang up instead of entering a destina-
tion. You hear a confirmation tone.

An endpoint user can enter one feature code that will return the following features to their
default states. Returning an endpoint to default:

•

Cancels the following features, if in effect:

—

Do-Not-Disturb

—

Manual Call Forwarding

—

Queue Request

—

Account Code for All Calls Following

—

Background Music

—

Ring Intercom Always

—

Headset Mode

•

Restores the following features, if disabled:

—

Handsfree

—

Page Receive

—

Hunt Group Replace

—

System Forwarding

•

Returns endpoint volumes to default levels

If you enter an incorrect password, the display will show INVALID PASS-
WORD, and the call is disconnected. Station users will hear reorder tones.