Hoover Clothes Dryer DYC 8713BX Manuale Utente
To Remove the Condenser
Important: Always switch off and remove the
plug from the electricity supply before cleaning
the condenser.
To maintain the efficiency of the dryer regularly
check that the condenser is clean.
plug from the electricity supply before cleaning
the condenser.
To maintain the efficiency of the dryer regularly
check that the condenser is clean.
1 . R e m o v e t h e
kickplate.
kickplate.
2. Turn the two locking
levers anti-clockwise
a n d p u l l o u t t h e
condenser.
levers anti-clockwise
a n d p u l l o u t t h e
condenser.
3 . P u l l o u t t h e
condenser unit.
condenser unit.
4. Gently remove any
dust or fluff with a cloth,
then wash the unit by
holding it under a
running tap turning it
so that water flows
between the plates, to
remove any dust or
fluff.
dust or fluff with a cloth,
then wash the unit by
holding it under a
running tap turning it
so that water flows
between the plates, to
remove any dust or
fluff.
5. Refit the condenser
ensuring it is in the
c o r r e c t w a y ( a s
indicated by the arrow)
and pushed firmly into
place. Lock the two
levers by turning them
clockwise.
ensuring it is in the
c o r r e c t w a y ( a s
indicated by the arrow)
and pushed firmly into
place. Lock the two
levers by turning them
clockwise.
6. Refit the kickplate.
CONDENSER
OPERATION
1. Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.
laundry. Ensure that garments do not hinder
closure of the door.
2. Gently close the door pushing it slowly until
you hear the door 'click' shut.
you hear the door 'click' shut.
3. Turn the Programme Selector dial to select
the required drying programme (see
Programme Guide).
the required drying programme (see
Programme Guide).
4. If drying synthetics, acrylics or delicate items,
press the
press the
Acrylic Synthetic
button to reduce the
heat level.
The indicator will light up when the machine is in
low heat setting. To deselect in the first few
minutes of the programme, press the
The indicator will light up when the machine is in
low heat setting. To deselect in the first few
minutes of the programme, press the
Acrylic
Synthetic
button , after this time reset the
machine to change the setting.
5. Press the Start/Pause
button. The dryer will
start automatically and the indicator above the
button will be continuously lit.
button will be continuously lit.
6. If the door is opened during the programme to
check the laundry, it is necessary to press
Start/Pause
check the laundry, it is necessary to press
Start/Pause
button to recommence drying after
the door has been closed.
7. When the cycle is nearing completion the
machine will enter the cool down phase, the
clothes will be tumbled in cool air allowing the
load to cool down.
machine will enter the cool down phase, the
clothes will be tumbled in cool air allowing the
load to cool down.
8. Following the completion of the cycle the
drum will rotate intermittently to minimize
creasing. This will continue until the machine is
switched OFF or the door is opened.
drum will rotate intermittently to minimize
creasing. This will continue until the machine is
switched OFF or the door is opened.
Do not open the door during the automatic
programs in order to obtain a proper drying.
programs in order to obtain a proper drying.
EN 12