Hoover Clothes Dryer condenser tumble dryer Manuale Utente

Pagina di 14
CONTROLS AND INDICATORS
Programme Selector – Select the required 
programme
Delay Start button   – Allows the user to 
delay the start of the drying cycle (see details 
of Operation on page 10)
Start/Pause button  – Press to commence 
the selected drying programme
Delicates button         – Press to reduce the 
heat level for delicate items, the indicator 
above the button will light up. To change the 
heat setting the programme must be reset
Low Heat – Indicator light   ON
High Heat 
– Indicator light  OFF
Empty Water indicator        – Lights when 
the water container is full
Filter Care indicator            – Lights when 
the filter needs cleaning
Progress display
DRY   
– When the programme is selected the 
DRY  indicator will flash, when the 
programme starts  the DRY  indicator will light 
up.
        – Indicator lights when there is a short 
time left until completion of the programme. At 
this stage of the drying cycle the machine 
enters the Cool Down phase.
The length of the Cool Down phase varies 
between 10 and 15 minutes depending on the 
programme.    
END   – Indicator lights when the programme 
is finished.
Control Panel and Indicator Lights
The  Sensor  Dry  machine  gives  many  options 
for drying the laundry to suit all circumstances. 
The  table  on  the  next  page  lists  the 
programmes  and  the  function  of  each 
programme.
Note: The sensor may not detect a small load of 
small  articles.  For  small  loads  and  separate 
items  or  pre-dried  fabrics  with  low  moisture 
content, use the timed programmes. 
Set the programme between 30 and 75 minutes 
depending  on  the  load  size  and  dryness 
required, and select high or low heat depending 
upon the fabric type.
If the sensor does not detect the item the dryer 
will  only  operate  for  10  minutes  before  going 
into cooldown.
If the load is too large or too wet to tumble dry 
the  dryer  will  automatically  go  into  cooldown 
after approximately 3 hours.
SELECTING THE  PROGRAMME
EN
7
Filter Care
Indicator
Empty Water
Indicator
Delay Start
Button
Start/Pause
Button
Progress
Display
Programme
Selector
Delicates
Button