Furuno RC-1500-1T Manuale Utente
5-11
5.8 Timer Operation
A built-in timer permits automatic transmission and reception of
telex messages.
telex messages.
Enabling Timer Operation
1. Press function key [F3] to display the Operate menu.
2. Press the [7] key to display the Timer Operation List.
3. Select the operation (name) you wish to execute. Press the [En-
ter] key. An asterisk appears beside the operation selected and
"T. Op" appears in inverse video on the communication status
display. If a file from a floppy disk is to be sent, be sure the
floppy disk containing the file is inserted in the drive.
"T. Op" appears in inverse video on the communication status
display. If a file from a floppy disk is to be sent, be sure the
floppy disk containing the file is inserted in the drive.
*1
2
3
OP4
OP5
Timer Operation List
Figure 5-10 Timer operation list
4. Select another operation (name) if desired.
5. Press the [Esc] key.
When the predetermined time comes, the DP-6 automatically sends
or receives messages. The results of timer operation are displayed
as either OK or NG (No Good) on the Timer Operation List.
or receives messages. The results of timer operation are displayed
as either OK or NG (No Good) on the Timer Operation List.
*1
2
*3
*OP4
*OP5
OK
OK
OK
NG
Timer Operation List
Figure 5-11 Timer operation list
Stopping Timer Operation
1. Press function key [F3].
2. Press the [7] key.
3. Select the operation (name) which has asterisk attached to it
and then press the [Enter] key. Remove all asterisks to cancel
all timer programs.
all timer programs.