Furuno RC-1500-1T Manuale Utente

EGC channel can be selected when the DTE is set to operate as an
EGC-only receiver. This procedure is shown for reference; currently
there is only one EGC channel per NCS.

1. Press [F8] to display the Setup menu.

2. Press [9] to display the Configuration menu.

3. Press [3]. The EGC channel which the EGC receiver is currently

tuned to appears on the display in reverse indication.

4. Select desired channel.

5. Press [Enter] to start the tuning.

6. Press [Esc] to close the Update screen.

7. Press [Enter] to select “Yes”.