Texas TMS320C645X Manuale Utente
Preface
SPRU976 – March 2006
Read This First
About This Manual
This document describes the Serial Rapid IO (SRIO) on the TMS320C645x devices.
Notational Conventions
This document uses the following conventions.
•
Hexadecimal numbers are shown with the suffix h. For example, the following number is 40
hexadecimal (decimal 64): 40h.
hexadecimal (decimal 64): 40h.
•
Registers in this document are shown in figures and described in tables.
–
Each register figure shows a rectangle divided into fields that represent the fields of the register.
Each field is labeled with its bit name, its beginning and ending bit numbers above, and its
read/write properties below. A legend explains the notation used for the properties.
Each field is labeled with its bit name, its beginning and ending bit numbers above, and its
read/write properties below. A legend explains the notation used for the properties.
–
Reserved bits in a register figure designate a bit that is used for future device expansion.
•
The term "word" describes a 32-bit value. The term "halfword" describes a 16-bit value.
Related Documentation From Texas Instruments
The following documents describe the C6000™ devices and related support tools. Copies of these
documents are available on the Internet at www.ti.com. Tip: Enter the literature number in the search box
provided at
documents are available on the Internet at www.ti.com. Tip: Enter the literature number in the search box
provided at
www.ti.com
.
TMS320C6000 CPU and Instruction Set Reference Guide (literature number
) gives an
introduction to the TMS320C62x™ and TMS320C67x™ DSPs, development tools, and third-party support.
TMS320C6455 Technical Reference (literature number
) gives an introduction to the
TMS320C6455™ DSP and discusses the application areas that are enhanced.
TMS320C6000 Programmer's Guide (literature number
) describes ways to optimize C and
assembly code for the TMS320C6000™ DSPs and includes application program examples.
TMS320C6000 Code Composer Studio Tutorial (literature number
) introduces the Code
Composer Studio™ integrated development environment and software tools.
Code Composer Studio Application Programming Interface Reference Guide (literature number
) describes the Code Composer Studio™ application programming interface (API), which allows
you to program custom plug-ins for Code Composer.
TMS320C64x+ Megamodule Reference Guide (literature number
) describes the
TMS320C64x+ digital signal processor (DSP) megamodule. Included is a discussion on the internal direct
memory access (IDMA) controller, the interrupt controller, the power-down controller, memory protection,
bandwidth management, and the memory and cache.
memory access (IDMA) controller, the interrupt controller, the power-down controller, memory protection,
bandwidth management, and the memory and cache.
TMS320C645x DSP Peripherals Overview Reference Guide (literature number
) provides a
brief description of the peripherals available on the TMS320C645x digital signal processors (DSPs).
TMS320C6455 Chip Support Libraries (CSL) (literature number
) is a download with the latest
chip support libraries.
Trademarks
C6000, TMS320C62x, TMS320C67x, TMS320C6455, TMS320C6000, Code Composer Studio, RapidIO
are trademarks of Texas Instruments.
are trademarks of Texas Instruments.
InfiniBand is a trademark of the InfiniBand Trade Association.
SPRU976 – March 2006
Preface
13