BMW 2007 M6 Convertible Manuale Proprietario

Pagina di 256
 59
Radio readiness and ignition off
All indicator and warning lamps in the instru-
ment cluster go out.
Starting engine
Do not run the engine in closed rooms, 
otherwise the inhalation of toxic exhaust 
gases can cause unconsciousness and death. 
The exhaust gases contain carbon monoxide, 
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the 
engine running, as such a vehicle represents a 
potential safety hazard.
Before leaving the vehicle with the engine run-
ning, shift into neutral
or move the selector 
lever into position N and firmly apply the hand-
brake, otherwise the vehicle can begin to roll.
<
Do not allow the engine to warm up by leaving it 
running while the vehicle remains stationary. 
Instead, drive off at a moderate engine speed.
Avoid frequent starting in quick succes-
sion or repeated starting attempts in 
which the engine does not start. Otherwise, the 
fuel is not burned at all or is burned inade-
quately and there is a danger of overheating and 
damage to the catalytic converter.
<
Manual transmission*
Remote control in ignition lock or with comfort 
access in vehicle, refer to page
.
1.
Depress brake pedal.
2.
Depress the clutch pedal and select the 
idling position.
3.
Press the Start/Stop button.
Sequential Manual Transmission with 
Drivelogic
Remote control in ignition lock or with comfort 
access in vehicle, refer to page
1.
Depress brake pedal.
2.
Place selector lever in position N.
3.
Press the Start/Stop button.
If the engine does not start, shift back to 
the last selector lever position selected, 
refer to the instrument cluster display or the 
selector lever. Then select position N.
You cannot start off with the hood open.
When the engine is cold, the exhaust system 
has a slightly metallic undertone due to the sys-
tem design.
<
Switching engine off
When leaving the vehicle, always take the 
remote control with you.
When parking, firmly apply the handbrake, as 
otherwise the vehicle could roll.
<
Manual transmission*
1.
Press the Start/Stop button with the vehicle 
stopped.
2.
Shift into first gear or reverse.
3.
Firmly apply the handbrake.
4.
Remove the remote control from the igni-
tion lock, refer to page
Sequential Manual Transmission with 
Drivelogic
1.
Firmly apply the handbrake.
2.
Move selector lever into a drive position.
3.
Press the Start/Stop button.
If N is engaged when switching off the 
engine, this will be pointed out to you opti-
cally and acoustically.
4.
Remove the remote control from the igni-
tion lock, refer to page
Online Edition for Part no. 01 41 0 013 314 - © 02/07 BMW AG