GSI Outdoors PNEG-214 Manuale Utente

PNEG-214 12'-18 Cor-Lok and Cut-Lok Flooring

1. Install the floor and support system, cutting the floor to go around the internal stiffeners as required.

2. Break the stiffener flashing support (SS-6984) into its three (3) components.

3. Lay the flashing supports on top of the flooring and weld the flashing supports to the stiffener as 

close as possible. Fasten the flashing to the wall, flashing support, and floor. Seal all spaces by 
welding or caulking.

4. Paint all welds with good quality zinc rich paint.

5. Stiffener flashing supports (SS-6984) must be ordered separately from the standard floor and flashing.