BMW 2010 M6 Convertible Manuale Proprietario

D Drive mode

In the Drive mode, all forward gears are shifted
automatically.
Shifting from Sequential mode to Drive mode:
shift using the shift paddles or the selector
lever, or press the selector level to the right in
the D/S direction.
Shifting back to Drive mode: press the selector
lever to the right in the D/S direction again.
Kickdown: for rapid acceleration, e.g. when
passing, press the accelerator pedal as far
down as it will go. You achieve maximum accel-
eration.

Displays in instrument cluster

1 Gear 1 to 7, R, N engaged
2 Selected driving program,

matches the number of illuminated fields,
refer to Drivelogic on page

3 In drive mode, the currently selected gear

followed by a D is displayed.

The gear display flashes when you open
the driver's door with the engine running.

If you do not subsequently operate the pedals,
shift paddles, or selector lever, then the system
shifts into N.

Gear changes

Using selector lever

To upshift, pull the selector lever back.

To downshift, push the selector lever for-
ward.

Using shift paddles on steering wheel

To upshift, briefly pull the right shift
paddle +.

To downshift, briefly pull the left shift
paddle –.

Drivelogic

With Drivelogic various driving programs are
available to you.
Each time you change between the Sequential
mode and the Drive mode, the driving program
last selected in the respective mode is active.
Exception: after the first change from the
Sequential to the Drive mode, driving program 3
is active.

In Drive mode

There are five different driving programs, rang-
ing from relaxed 1 to sporty/highly dynamic 5.

In Sequential mode

You can choose from six driving programs from
balanced/dynamic 1 to sporty/purist 6.
Program 6 is only available when the DSC
Dynamic Stability Control is deactivated, refer
to page

. If DSC is activated, then the system

switches from program 6 to program 5.

To maintain vehicle stability, always acti-
vate DSC whenever possible.