Beltronics RX55 Manuale Proprietario
Your new BEL Pro RX55 is the most
advanced radar and laser detector available.
advanced radar and laser detector available.
The RX55 includes full X, K, and
SuperWide Ka radar protection, front and
rear laser detection, Digital Signal
Processing for superior range and falsing
rejection, our patented Mute and AutoMute,
audible and visual band alerts, and all the
performance you’d expect from Beltronics.
rear laser detection, Digital Signal
Processing for superior range and falsing
rejection, our patented Mute and AutoMute,
audible and visual band alerts, and all the
performance you’d expect from Beltronics.
In addition, the new BEL Pro RX55
introduces a new level of performance and
innovative features.
innovative features.
• New long-range radar performance
• Multiple laser sensors for improved
• Multiple laser sensors for improved
long-range detection
• Exclusive Programming lets you
instantly set 7 features
• Exclusive AutoScan
™
mode, plus
Highway and City settings
• 280 LED Text-Matrix Display for easy
to read messages
• Detects and decodes all Safety Radar
signals
• New VG-2 Alert/Auto Shutoff
• Optional SmartPlug compatible
• Optional SmartPlug compatible
If you’ve used a radar detector before, a
review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please read
the manual in detail to get the most out of
your RX55’s performance and features.
your RX55’s performance and features.
Please drive safely.
FCC Note:
Modifications not expressly approved by
the manufacturer could void the user’s FCC
granted authority to operate the equipment.
Modifications not expressly approved by
the manufacturer could void the user’s FCC
granted authority to operate the equipment.
Congratulations
Quick Reference Card
1
Programming Details E
Factory Default Settings
To reset RX55 to its original factory
settings, press and hold the “CITY” and
“BRT” buttons while turning the power
on. The RX55’s display will provide a
“Reset” message, accompanied by an
audible alert, acknowledging the reset.
To reset RX55 to its original factory
settings, press and hold the “CITY” and
“BRT” buttons while turning the power
on. The RX55’s display will provide a
“Reset” message, accompanied by an
audible alert, acknowledging the reset.
BEL Pro RX55 Quick Reference Card
H
Remove card along perforations
H
H
Re
m
ov
e
ca
rd
al
on
g
pe
rfo
ra
tio
ns
H
An example of Programming
Here is how you would turn RX55’s
AutoMute feature off.
AutoMute feature off.
1 Enter the Program Mode by holding both
the CITY and BRT buttons down for 2
seconds. The RX55 will beep twice and
display Program.
the CITY and BRT buttons down for 2
seconds. The RX55 will beep twice and
display Program.
2 Press and hold the RVW button. The
RX55 will scroll through the categories,
starting with Power-on indication
(Pilot), then Power-on sequence
(PwrOn), Voice (VoiceOn), and then
AutoMute (aMute).
RX55 will scroll through the categories,
starting with Power-on indication
(Pilot), then Power-on sequence
(PwrOn), Voice (VoiceOn), and then
AutoMute (aMute).
3 Release the RVW button when the RX55
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the RX55 will display aMute ON.
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the RX55 will display aMute ON.
(If you accidentally don’t release the
RVW button in time, and the RX55 goes to
the next category, hold the RVW button
down again, and after the RX55 scrolls
through all categories, it will begin again
at the top of the list.)
the next category, hold the RVW button
down again, and after the RX55 scrolls
through all categories, it will begin again
at the top of the list.)
4 Press the CHG button to change from
aMute ON
aMute ON
to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button,
or press the PWR button. The RX55 will
display Complete, beep, and return to
normal operation.
wait 8 seconds without pressing any button,
or press the PWR button. The RX55 will
display Complete, beep, and return to
normal operation.
There are 7 user-selectable options so you
can customize your RX55 for your own
preferences.
can customize your RX55 for your own
preferences.
The buttons labeled CITY and BRT are
also used to enter the Program Mode,
REVIEW your current program settings, and
to CHANGE any settings as desired. The
words PROGRAM, RVW and CHG are
located on the top of the detector.
REVIEW your current program settings, and
to CHANGE any settings as desired. The
words PROGRAM, RVW and CHG are
located on the top of the detector.
How to use Programming
1 To enter Program Mode, press and
hold the CITY and BRT buttons down
hold the CITY and BRT buttons down
for 2 seconds. (The unit will beep twice,
and will display the word “Program”).
and will display the word “Program”).
2 Then press the RVW button to
REVIEW the current settings. (You can
either tap the button to change from item
to item, or hold the button to scroll through
the items).
REVIEW the current settings. (You can
either tap the button to change from item
to item, or hold the button to scroll through
the items).
3 Press the CHG button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4 To leave Program Mode, simply wait
8 seconds without pressing any button.
8 seconds without pressing any button.
(The unit will display Complete, beep 4
times, and return to normal operation).
times, and return to normal operation).