Behringer EUROCOM ST2600 Foglio Delle Specifiche

3

Summary Description: The loudspeaker shall be of the in-ceiling type, with a 6.5" (165 mm) low-frequency transducer, 

a waveguide-mounted 0.75" (20 mm) high-frequency transducer and an internal crossover installed in a ported enclosure. 
Performance specifications shall be as follows: Measured sensitivity at least 89 dB-SPL at 1 m (3.3 feet) with 2.83 V input, 

averaged from 100 Hz to 10 kHz). Usable frequency response shall extend from 75 Hz - 21 kHz (10 dB below rated sensitivity 

in half-space) with no external equalization. Rated power shall be at least 30 watts continuous pink noise power, defined as 

conforming to international standard IEC268-5 (shaped pink noise with peak-to-average ratio of 6 dB) for a period of 100 

continuous hours. The high-frequency transducer shall be waveguide-loaded to cover a minimum 150° polar conical 

coverage area.
Enclosure: The back can shall be made of formed steel with a waveguide/baffle of UL94V-0 fire rated medium impact 

polystyrene. An enclosed terminal box shall be included with strain relief for use with either plenum-rated wire, 0.5" (13 mm) 

inside diameter conduit, or flexible conduit up to 0.75" (19 mm) outside diameter. External wiring shall be accomplished via 

a removable lockable wiring connector with screw-down terminals to provide both secure wire termination and prewiring 

capability. Secondary cabling to building structure support shall be provided via an attachment loop on the back panel.
Mounting: The system shall include a backing plate to reinforce the ceiling material plus tile support rails for 2 x 4 foot 

(600 x 1200 mm) suspended ceiling tiles, all to be installable from beneath the ceiling tile. Overall front face diameter shall not 

exceed 10.2" (260 mm), overall depth from the bottom of the ceiling shall not exceed 7.7" (196 mm), and shall weigh no more 

than 7.92 lbs (3.60 kg).
Electrical: Nominal impedance shall be 8 ohms. The loudspeaker shall be equipped with transformer for use in eithe r 

70 or 100 V distributed-line speaker systems, with taps selectable by rotary switch accessed by removing the speaker grille. 

Taps shall be 60 W @ 70 V, 30 W @ 70 V (60 W @ 100 V), 15 W @ 70 V (30 W @ 100 V), and 7.5 W @ 70 V (15 W @ 100 V).
Model: The loudspeaker shall be the BEHRINGER EUROCOM ST2600.