Behringer Cable Tester CT100 Manuale Proprietario
4 CABLE TESTER CT100 User Manual
5. Phantom Power Detect
In TEST TONE MODE, pins 2 and 3 are monitored for external DC voltage
(commonly supplied for condenser microphones). The PHANTOM LEDs will light if DC
voltage above approx. 9 V is detected.
(commonly supplied for condenser microphones). The PHANTOM LEDs will light if DC
voltage above approx. 9 V is detected.
6. Wiring
strain relief clamp
sleeve
ring
tip
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
tip
hot (+ve)
1/4", TT, 1/8" TRS connectors (mono or TS connectors also work)
Unused
Pin 3
Pin 1
(ground)
Unused
Pin 2
Pin 2
MIDI connector (2 pins unused)