Blue Rhino WAF830SP Manuale Utente

1.  Make sure there is only a small amount of ash in the bottom of the bowl.
2.  Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the 

grate.

3.  Place above that a layer of dry seasoned hardwood that is cut to lengths no more than  

3/4 the diameter of the bowl.

4.  Use a match to light kindling or firestarter. 
5.  Using heat resistant gloves close spark guard door, once the kindling or firestarter is lit.

You may need to shift and/or add logs for an ideal experience.
Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as 
grass, wooden deck or furniture.
1.  Using heat resistant gloves, carefully open spark guard door.
2.  While using a long handled fireplace tool, shift coals and logs to allow additional airflow.
3.  Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an 

existing fire.

4.  Wait until glowing coals have developed before adding any additional wood.  If additional 

wood is required, place wood on top of coals. Be careful not to shift ashes.

5.   Using heat resistant gloves close spark guard door.

1.  Using heat resistant gloves, carefully open spark guard door, and if necessary slide cooking 

grid no more than 1/2 way out.

2.  Using heat resistant gloves, place food onto cooking grid above the hot coals with long 

handle tongs. 

3.  Using heat resistant gloves close spark guard door, cook until desired internal food 

temperatures are achieved. 

4. If food needs to be turned over, repeat “Cooking” Instructions.
5. To remove food:

a.  Using heat resistant gloves, carefully open spark guard door, and if necessary slide 

cooking grid no more than 1/2 way out.

b.  Using heat resistant gloves, remove food from cooking grid with long handle tongs. 
c.  Using heat resistant gloves close spark guard door. 

Note: If additional wood is needed, while wearing protective gloves open spark guard door and 
insert additional logs without disturbing the hot coals. Carefully close spark guard door. 

1.  Allow fire to burn itself out.
2.  Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor 

fireplace.

This outdoor fireplace should be inspected on a regular basis to ensure product safety and 
longer product life.
Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out.
1.  Check handles to make sure they are secure.
2.  Check components for any signs of damage or rust.  
3.  If damage to any component is detected, do NOT operate until repairs are executed.

This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and 
longer product life.
Note: After repeated use, a slight discoloration of the finish may occur.
Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out.
Do NOT use oven cleaner or abrasive cleaners as they will damage this product.
Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage 
the finish.
1.  Wipe exterior surfaces with a mild dishwashing detergent or baking soda. 
2.  For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush. 
3.  Rinse clean with water.
4.  Remove built-up creosote from components with a chimney cleaning product.

Do NOT move or store this outdoor fireplace until the fire is COMPLETELY out.
1.  Once the fire is out, coals are cold and outdoor fireplace is cool to the touch, remove ashes 

and properly dispose. 

2.  Store assembled in a cool, dry location away from children and pets.

For faster warranty service, please register your product immediately at www.bluerhino.com or 
call 1.800.762.1142.

Blue Rhino Global Sourcing, LLC (“Vendor”) warrants to the original retail purchaser of this 
product, and to no other person, that if this product is assembled and operated in accordance 
with the printed instructions accompanying it, then for a period of one (1) year from the date 
of purchase, all parts in such product shall be free from defects in material and workmanship. 
Vendor may require reasonable proof of your date of purchase. Therefore, you should retain 
your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of 
parts, which prove defective under normal use and service and which Vendor shall determine 
in its reasonable discretion upon examination to be defective. Before returning any parts, you 
should contact Vendor’s Customer Service Department using the contact information listed 
below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any 
returned part, and if Vendor approves the claim, Vendor will replace such defective part without 
charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will 
return replacement parts to the original retail purchaser, freight or postage prepaid.

This Limited Warranty does not cover any failures or operating difficulties due to accident, 
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or 
service by you or any third party, or failure to perform normal and routine maintenance on 
the product as set out in this owner’s manual.  In addition, the Limited Warranty does not cover 
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage, 
after purchase.

This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties 
for products that are purchased from sellers other than authorized retailers or distributors, 
including the warranty of merchantability or the warranty of fitness for a particular purpose. 
VENDOR ALSO DISCLAIMS AND ANY ALL IMPLIED WARRANTIES, INCLUDING WITHOUT 
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. VENDOR SHALL NO LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY 
SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Vendor further 
disclaims any implied or express warranty of, and assumes no responsibility for, defects in 
workmanship caused by third parties.

This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other 
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or 
limitation of special, incidental or consequential damages, or limitations on how long a warranty 
lasts, so the above exclusion and limitations may not apply to everyone.

Vendor does not authorize any person or company to assume for it any other obligation or 
liability in connection with the sale, installation, use, removal, return, or replacement of its 
equipment, and no such representations are binding on Vendor.

Blue Rhino Global Sourcing, LLC
Winston-Salem, North Carolina 27105 USA
1.800.762.1142