Blaupunkt TRIER RCR 126 Manuale Utente
28
LEARN KC
To “define” a second Key-
Card for use with the set.
Please read the information
under “KeyCard theft-pro-
tection system”.
Card for use with the set.
Please read the information
under “KeyCard theft-pro-
tection system”.
To quit the DSC programming mode and
store the adjustment:
•
store the adjustment:
•
Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
Overview of the DSC factory
settings
settings
TA VOL
: 4
BEEP
: 3
LED (Code) : 1
LOUD
LOUD
: 4
RM
: OFF
LOCAL
: 1
DIS
: 1
Appendix
Care notes
Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
tures exceeding 50
°
Celsius. Allow very cold
tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
Specifications
Amplifier
Output power:
Output power:
4 x 20 W RMS power
acc. to DIN 45324
(14,4V),
4 x 30 W max. power
(14,4V),
4 x 30 W max. power
FM waveband
Sensitivity:
Sensitivity:
1,0
µ
V at 26 dB
signal-to-noise ratio
Frequency
response:
response:
35 - 16 000 Hz
Tape player
Frequency
response:
Frequency
response:
35 - 16 000 Hz
Subject to modifications!
BA Trier RCR 126 gb®
13.05.2002, 11:52 Uhr
28