Havis-Shields WGI-F13 Dépliant
WGI-F13_INST_9-07
INSTALLATION INSTRUCTIONS WGI-F13
INTERIOR WINDOW GUARDS
FOR 2002-2008 FORD EXPLORER
TOOLS REQUIRED:
Power drill
Magic marker or pencil
Phillips screwdriver
1/8” drill bit
Power drill
Magic marker or pencil
Phillips screwdriver
1/8” drill bit
3/16” drill bit
Safety Goggles
Snips or cutter for plastic trim
Ratchet wrench with 7/16” socket
Safety Goggles
Snips or cutter for plastic trim
Ratchet wrench with 7/16” socket
HARDWARE FOR PASSENGER DOORS (WGI-F13-1 & WGI-F13-6):
18
#10 X 1/2” Sheet metal screws
GSM34150
INSTALLATION: (PASSENGER DOORS)
1.
Hold window guard up to the window frame, and while pushing down against the door window
frame, mark mounting hole locations. Remove guard and drill out mounting holes with 1/8” drill
bit. Attach guards with #10 X 1/2” sheet metal screws.
frame, mark mounting hole locations. Remove guard and drill out mounting holes with 1/8” drill
bit. Attach guards with #10 X 1/2” sheet metal screws.
FORD EXPLORER
WINDOW GUARD POSITIONS
MODEL WGI-F13
POSITION #1
DRIVERS
SIDE
PASSENGER
DOOR
F13-1
DRIVERS
SIDE
PASSENGER
DOOR
F13-1
POSITION #6
PASSENGER
SIDE
PASSENGER
DOOR
F13-6
PASSENGER
SIDE
PASSENGER
DOOR
F13-6