Brother XL-3510 Guida All'Installazione Rapida
10
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
MAKING AN EMBROIDERED APPLIQUÉ FROM A ONE-POINT PATTERN
3
Place the pre-cut design fabric in the design frame.
Putting the pre-cut design fabric in the design frame
1
1
1
1
Lift up side A of the design frame.
2
2
2
2
Place the pre-cut design fabric in the
design frame so the side that will be the
front of the embroidery faces up.
front of the embroidery faces up.
Either side of the pre-cut design fabric can
used as the front of the embroidery.
used as the front of the embroidery.
Hook the holes in the design fabric onto the
pins on side B of the design frame.
pins on side B of the design frame.
1 Side A (white)
2 Side that will be the front of the embroidery
2 Side that will be the front of the embroidery
3
3
3
3
Snap the design frame closed at the
two places shown.
The maximum embroidering area is
6
6
6 cm. However, the actual size of the
embroidery will depend on the pattern selected.
1
2
CAUTION
•
Do not embroider onto anything other than the pre-cut design fabrics designed
exclusively for this machine.
exclusively for this machine.
•
The smoother (leather-like) side of the pre-cut design fabric may shrink or become
wrinkled if it gets wet.
wrinkled if it gets wet.