Brother XL-3510 Guida All'Installazione Rapida
20
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
MAKING AN EMBROIDERED APPLIQUÉ FROM A ONE-POINT PATTERN
7
When the machine is finished
embroidering, it automatically stops and
the screen shown at the right appears.
embroidering, it automatically stops and
the screen shown at the right appears.
8
Remove the thread cartridge.
The design frame moves back to its starting point
so it can be removed. After the final animation is
displayed, the screen shown at the right appears.
so it can be removed. After the final animation is
displayed, the screen shown at the right appears.
9
Pull out the design frame. Then, take the
pre-cut design fabric out of the frame.
pre-cut design fabric out of the frame.
●
●
6.
Selecting the next operation
To embroider the same pattern again
Press the
key until
is highlighted, and then press the
key. The screen shown on
page 13 under Inserting the thread cartridge and design frame appears. Repeat the steps to
embroider the same pattern.
embroider the same pattern.
To save the pattern
Press the
or
key until
is highlighted, and then press the
key. For more details,
To embroider a different pattern
Press the
key until
is highlighted, and then press the
key. The screen shown on
To finish using the machine
Press the
key.
Key information
•
To skip the animation, press any key.
CAUTION
•
Be sure to follow the correct procedure for removing the thread cartridge before
removing the design frame, otherwise the stitching may be damaged. (See the section
Removing the thread cartridge on page 15 and Removing the design frame on page 17.)
removing the design frame, otherwise the stitching may be damaged. (See the section
Removing the thread cartridge on page 15 and Removing the design frame on page 17.)
Finished embroidery