Biostar M7VIW BIOS Manuale Proprietario
M7VIW BIOS Setup
24
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the system to Full
ON state.
When you select Enabled, a PME signal from PCI card returns the system to Full
ON state.
The Choices: Disabled (default), Enabled.
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card which support power on
function. It should also support the wake-up on LAN jump.
To use this function, you need a LAN add-on card which support power on
function. It should also support the wake-up on LAN jump.
Disabled (default)
Wake up on LAN/Ring not supported.
Enabled Wake up on LAN/Ring supported.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system from Suspend mode.
When “Enabled”, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system from Suspend mode.
The Choices: Enabled, Disabled (default).
IRQs Activity Monitoring
Press Enter to access another sub menu used to configure the different wake up
events (i.e. wake on LPT & COMM activity).
events (i.e. wake on LPT & COMM activity).
Primary INTR
On
IRQ3
(COM2)
Enabled
IRQ4
(COM1)
Enabled
IRQ5
(LPT2)
Enabled
IRQ6
(Floppy
Disk) Enabled
IRQ7
(LPT1)
Enabled
IRQ8 (RTC Alarm)
Disabled
IRQ9 (IRQ2 Redir)
Disabled
IRQ10
(Reserved)
Disabled
IRQ11
(Reserved)
Disabled
IRQ12 (PS/2 Mouse)
Enabled
IRQ13
(Coprocessor) Enabled
IRQ14 (Hard Disk)
Enabled
IRQ15
(Reserved)
Disabled