Biostar P4TPT 7.5 Manuale Proprietario
P4TPT BIOS Manual
29
9 Frequency Control
Figure 9. Frequency Control
CPU Clock Ratio
This item allows you to select the CPU Ratio.
DDR Voltage
This item allows you to select DDR Voltage Regulator.
The Choices: 2.5V (Default), 2.6, 2.7, and 2.8.
Auto Detect DIMM/PCI Clk
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled (default), Disabled.
CPU Clock
This
item allows you to select CPU Clock, and CPU over clocking.
If unfortunately, the system’s frequency that you are selected is not functioning,
there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as
“ON” status. All the CMOS data will be loaded as defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen
showed. This action will boot-up the system according to FSB of
the processor.
showed. This action will boot-up the system according to FSB of
the processor.
※
It’s strongly recommended to set CPU Vcore and clock in default
setting. If the CPU Vcore and clock are not in default setting, it may
cause CPU or M/B damage.
cause CPU or M/B damage.