Brother HL-L8250CDN Manuale Utente

General Information 

1

### means a number within the range of 000 to 255. On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt 
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will 
be allocated, such as 169. 254. [001-254]. [000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address 
from the machine's control panel.

Network Reset Restores all network settings of the internal print server to the factory settings.

Network

Restores all network settings of the internal print server to the factory settings.

Factory Reset

Resets the machine and restores the printer settings (including command settings) to the 
factory settings.

 The factory settings are shown in Bold with an asterisk.

Calibration

Calibrate

a

 Yes b No

Performs a calibration to check and correct 
the colors.

Reset

a

 Reset b Exit

Set the calibration parameters back to the 
default settings.

Registration

-

a

 Yes b No

Aligns the print position of each color.

Auto Correction

-

On* / Off

Sets the machine to perform Color 
Calibration and Registration automatically.

 The factory settings are shown in Bold with an asterisk.

 The factory settings are shown in Bold with an asterisk.