Brother HL-L8250CDN Manuale Utente
Troubleshooting
172
6
Cover is Open
The front cover is not closed
completely.
completely.
Close the front cover of the machine.
The fuser cover is not closed
completely.
completely.
Close the fuser cover located inside the back cover of
the machine.
the machine.
DIMM Error
The DIMM is not installed
correctly.
correctly.
The DIMM is broken.
The DIMM does not meet the
required specifications.
required specifications.
Turn off the machine and unplug the power cord.
Remove the DIMM. (See Installing extra memory
on page 116.)
Remove the DIMM. (See Installing extra memory
on page 116.)
Confirm that the DIMM meets the required
specifications. (For details, see SO-DIMM types
on page 115.)
specifications. (For details, see SO-DIMM types
on page 115.)
Reinstall the DIMM correctly. Wait a few seconds. Plug
in the power cord, and then turn the machine on again.
in the power cord, and then turn the machine on again.
If this error message appears again, replace the
DIMM with a new one. (See Installing extra
memory on page 116.)
DIMM with a new one. (See Installing extra
memory on page 116.)
Drum End Soon
The drum unit is near the end of its
life.
life.
Order a new drum unit now so a replacement drum
unit will be available when the LCD displays
Replace Drum (see Drum End Soon on page 128).
unit will be available when the LCD displays
Replace Drum (see Drum End Soon on page 128).
Drum !
The corona wire on the drum unit
needs to be cleaned.
needs to be cleaned.
Clean all four corona wires inside the drum unit by
sliding the blue tabs (see Cleaning the corona wires
on page 154).
sliding the blue tabs (see Cleaning the corona wires
on page 154).
The drum unit is not installed
correctly.
correctly.
Remove the drum unit, remove the toner cartridges from
the drum unit, and put the toner cartridges back into the
drum unit. Reinstall the drum unit in the machine.
the drum unit, and put the toner cartridges back into the
drum unit. Reinstall the drum unit in the machine.
Drum Stop
It is time to replace the drum unit.
Replace the drum unit (see Replacing the drum unit
on page 128).
on page 128).
Jam 2-sided
The paper is jammed underneath
the paper tray or the fuser unit.
the paper tray or the fuser unit.
Jam Inside
The paper is jammed inside the
machine.
machine.
Jam MP Tray
The paper is jammed in the
multi-purpose tray of the machine.
multi-purpose tray of the machine.
Jam Rear
The paper is jammed in the back of
the machine.
the machine.
Jam Tray 1
Jam Tray 2
The paper is jammed in the paper
tray of the machine.
tray of the machine.
Limit Exceeded
The print limit set in Secure
Function Lock was reached.
Function Lock was reached.
Contact your administrator to check your Secure
Function Lock settings.
Function Lock settings.
Log Access Error
The machine could not access the
print log file in the server.
print log file in the server.
Contact your administrator to check the Store Print
Log to Network settings.
Log to Network settings.
(For detailed information, see the Network User's
Guide.)
Guide.)
No Belt Unit
The belt unit is not installed
correctly.
correctly.
Reinstall the belt unit (see the steps in Replacing the
belt unit on page 135).
belt unit on page 135).
Error message
Cause
Action