Biostar TForce 945P Manuale Proprietario

1.  No power to the system at 

all Power light don’t 
illuminate, fan inside power 
supply does not turn on.   

2.  Indicator light on keyboard 

does not turn on. 

1.  Make sure power cable is 

securely plugged in. 

2. Replace 

cable. 

3.  Contact technical support. 

System inoperative. 
Keyboard lights are on, 
power indicator lights are lit, 
and hard drive is spinning. 

Using even pressure on both 
ends of the DIMM, press 
down firmly until the module 
snaps into place. 

System does not boot from 
hard disk drive, can be 
booted from optical drive. 

1.  Check cable running from 

disk to disk controller board. 
Make sure both ends are 
securely plugged in; check 
the drive type in the standard 
CMOS setup. 

2.  Backing up the hard drive is 

extremely important. All hard 
disks are capable of breaking 
down at any time. 

System only boots from 
optical drive. Hard disk can 
be read and applications 
can be used but booting 
from hard disk is 
impossible. 

1.  Back up data and application 

files.   

2.  Reformat the hard drive. 

Re-install applications and 
data using backup disks. 

Screen message says 
“Invalid Configuration” or 
“CMOS Failure.” 

Review system’s equipment. 
Make sure correct information 
is in setup. 

Cannot boot system after 
installing second hard 
drive. 

1.  Set master/slave jumpers 

correctly. 

2.  Run SETUP program and 

select correct drive types. Call 
the drive manufacturers for 
compatibility with other drives.