Brother HL-1110 Manuale Utente
General Information
43
3
Ecology features
3
Toner Save
3
You can save toner using this feature. When you set Toner Save to on, prints appear lighter. The default
setting is off.
You can change the toner save mode setting on the printer driver.
To change the toner save mode setting, see the following:
setting is off.
You can change the toner save mode setting on the printer driver.
To change the toner save mode setting, see the following:
Advanced tab on page 13 (Windows
®
printer driver)
Print Settings on page 31 (Macintosh printer driver)
Sleep Time
3
The Sleep mode setting can reduce power consumption. When the machine is in Sleep Mode (Power Save
mode) it acts as though it were turned off. The machine will wake up and start printing when it receives a print
job.
The machine automatically goes into Sleep mode after it is idle for 1 minute. When the machine receives a
print file or document, the timer will be reset. While the machine is in Sleep mode the Ready LED ( ) glows
dimly.
mode) it acts as though it were turned off. The machine will wake up and start printing when it receives a print
job.
The machine automatically goes into Sleep mode after it is idle for 1 minute. When the machine receives a
print file or document, the timer will be reset. While the machine is in Sleep mode the Ready LED ( ) glows
dimly.
Deep Sleep mode
3
If the machine is in Sleep mode and does not receive any jobs for a certain length of time, the machine will
go into Deep Sleep mode automatically and the Ready LED ( ) glows dimly. Deep Sleep mode uses less
power than Sleep Mode. The machine will wake up, when the machine receives a print job.
go into Deep Sleep mode automatically and the Ready LED ( ) glows dimly. Deep Sleep mode uses less
power than Sleep Mode. The machine will wake up, when the machine receives a print job.