Behringer Musical Instrument PB600 Manuale Utente
Pedal Board with 9 V DC Power Supply
and Patch Cables
and Patch Cables
Ultra-compact and lightweight pedal
board for transporting up to 6 eff ects
pedals, including patch cables
board for transporting up to 6 eff ects
pedals, including patch cables
Generous 1.7 A power adapter
included for powering more
than 12 devices*—includes
1 x 6 daisy-chain cabling
included for powering more
than 12 devices*—includes
1 x 6 daisy-chain cabling
Ultra-rigid plastic design withstands
even heavy impact
even heavy impact
High-quality components and
exceptionally rugged construction
ensure long life
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
BEHRINGER Germany
* Depends on the power consumption
of the eff ects pedals, etc.
of the eff ects pedals, etc.
When eff ects are an integral part of your
rig, their power adapters and patch cables
can often be the most vulnerable part, and
the most likely to sabotage your set if they're
not pampered. Rather than tossing your
pedals, power adapters and all other cabling
into a duff el bag after a gig, keep them
safe—and ready to rock at a moment’s
notice—with the PB600.
can often be the most vulnerable part, and
the most likely to sabotage your set if they're
not pampered. Rather than tossing your
pedals, power adapters and all other cabling
into a duff el bag after a gig, keep them
safe—and ready to rock at a moment’s
notice—with the PB600.
It's all about connections
This awesome pedal board makes
hooking up six 2.5" x 4.5" pedals as easy
as hooking up just one (of course, if you're
using pedals that aren’t 2.5" x 4.5", the snug
foam padding can be cut to accommodate
pedals of varying shapes). The PB600
includes ¼" patch cables, so you can leave
your pedals connected to one another, ready
to pass signal even when you’re transporting
them. It also comes with 1 x 6 daisy chain
cabling so that when you plug in the 1.7 A
power adapter, all your pedals receive power.
Meanwhile, all cabling remains safe and
free of strain. Failure is almost guaranteed
when you’re dealing with a rat’s nest of loose
cabling, but with the PB600, your eff ects
chain is always safe and organized.
as hooking up just one (of course, if you're
using pedals that aren’t 2.5" x 4.5", the snug
foam padding can be cut to accommodate
pedals of varying shapes). The PB600
includes ¼" patch cables, so you can leave
your pedals connected to one another, ready
to pass signal even when you’re transporting
them. It also comes with 1 x 6 daisy chain
cabling so that when you plug in the 1.7 A
power adapter, all your pedals receive power.
Meanwhile, all cabling remains safe and
free of strain. Failure is almost guaranteed
when you’re dealing with a rat’s nest of loose
cabling, but with the PB600, your eff ects
chain is always safe and organized.
Connect your guitar, bass or keyboard to
the single ¼" input in the upper right corner
of the board. A pair of ¼" FROM EFFECTS
jacks in the upper left corner allow you to
connect stereo eff ects, and two ¼" OUTPUT
TO AMP jacks send a left and right stereo
signal to up to two amps.
of the board. A pair of ¼" FROM EFFECTS
jacks in the upper left corner allow you to
connect stereo eff ects, and two ¼" OUTPUT
TO AMP jacks send a left and right stereo
signal to up to two amps.
When it’s time to load out, just unplug
the power supply, disconnect your guitar
and amp, put the lid back on the PB600
and slide the locking latches back into
place. The heavy-impact plastic casing will
protect your pedals from the very worst
dings, scrapes and scratches the road
throws your way.
and amp, put the lid back on the PB600
and slide the locking latches back into
place. The heavy-impact plastic casing will
protect your pedals from the very worst
dings, scrapes and scratches the road
throws your way.
PEDAL BOARD
PB600
PB600
Stompbox Accessories