LG DP581B Manuale Proprietario

Pagina di 24
8
Power connections
Connecting the AC Adaptor
Connect the supplied AC Adaptor from the unit to a power socket.
AC adaptor
•  This AC adaptor operates on 100 - 240 V - 1.0 A 50 / 60 Hz.
•  Contact an electrical parts distributor for assistance in selecting a suitable 
AC plug adaptor or AC cord set.
•  Manufactured by I-MAG ELECTRONICS(DONG GUAN) CO., LTD.
Connecting the Automotive adaptor
This unit and its automotive adaptor are designed for use in vehicles that have 
8.5 - 15 volt, negative ground electrical systems. This is standard for most 
vehicles. If your vehicle has a different type of electrical system, the DC power 
system cannot be used.
Automotive adaptor
•  This automotive adaptor operates on DC 8.5 - 15 V.
•  Contact an electrical parts distributor for assistance in selecting a suitable 
automotive adaptor.
•  Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY 
(SHENZHEN) CO., LTD.
Caution 
•  To prevent electrical shock and possible damage to your unit or vehicle, 
always unplug the automotive adaptor from the power supply socket in the 
car before you remove the plug from your unit.
•  A 3 amp. 250 V fuse for protection is installed in the automotive adaptor.
•  While the engine is being started, disconnect the automotive adaptor from 
the car’s cigarette lighter socket.
•  Do not operate your unit when the car battery is discharged. 
Peak current from the car generator may cause the DC fuse to be blown.
•  If the vehicle’s supply voltage drops below approximately 10 volts, your unit 
may not work properly.
•  Do not leave your unit in the place where the temperature exceeds 45 °C 
(113 °F), or the pick-up device may be damaged.
 Examples 
include: 
- Inside a car with the windows closed and in direct sunshine.
- Nearby a heating appliance.
* The actual set may differ from the drawing.
Plug in a power source.
Plug in the  “DC 12 V IN” 
Plug in the power supply 
socket in the car.