Brother HL-5040 Manuale Proprietario

TROUBLESHOOTING   6 - 3

The printer will report problems by printing an error message as defined in the following table. Take the 
corrective actions for the error message.

■

Press the Go button to print the data left in the printer. Press the Job Cancel 
button if you want to delete the data left in the printer.

■

Reduce the print resolution or reduce the complexity of your document.

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.

■

Press the Go button to print the data left in the printer. Press the Job Cancel 
button if you want to delete the data left in the printer.

■

If this does not clear the error, reduce the complexity of your document or 
reduce the print resolution.

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.

■

Set page protection to ON by using the supplied Windows driver or RPC 
program.

■

Change the following settings in the supplied Windows driver and try again. 
The best combination of these settings will vary depending on your document:

Graphics Mode
TrueType™ mode
Use Printer TrueType™ Fonts

RESOLUTION REDUCED 
TO ENABLE PRINTING
(The printer has printed the 
document at a reduced 
resolution)

■

Reduce the complexity of your document before you print to prevent 
automatic reduction in the resolution. 

■

Expand the printer memory by adding a commercially available DIMM. See 
Installing additional memory in Chapter 4.