Brother HL-4070CDW Manuale Proprietario

Troubleshooting

170

For Macintosh

with USB

Printing from DOS

BR-Script 3 (HL-4050CDN / HL-4070CDW only)

Problem

Recommendation

The printer does not appear in

Print Center (Mac OS

X 10.2)

or Print Setup Utility (Mac

X 10.3 or greater).

Make sure that the printer is turned on.

Make sure that the USB interface cable is connected correctly.

Make sure the printer driver is installed correctly.

Unable to print from the
application.

Make sure that the supplied Macintosh

printer driver is installed in the Hard Disk

and that it is chosen with Print Center (Mac OS

X 10.2) or Print Setup Utility

(Mac OS

X 10.3 or greater).

Problem

Recommendation

Cannot print from an application.

Make sure that the DOS application interface settings match those of your
printer. For example, if you are using a parallel printer cable, you would set
your DOS application printer port to LPT1.

Check if the printer has any printer alarms.

Make sure that you have chosen a printer driver in your application that is
supported by your Brother printer. (For information about the printers your
machine can emulate, see About emulation modes on page 68.)

Problem

Recommendation

The print speed slows down.

Add optional memory. (See Installing extra memory on page 95.)

The printer cannot print EPS data
that includes binary.

You need the following settings to print EPS data:

For Windows Vista™: Click Start button, Control Panel, Hardware and
Sound, and then Printers.

For Windows

XP and Windows Server

2003: Click Start button, and

select Printers and Faxes windows.

For Windows

2000: Click Start button, and select Settings and then

Printers.

Right-click the Brother HL-4070CDW(HL-4050CDN) BR_Script3 series
icon and select Properties.

From the Device Settings tab, choose TBCP (Tagged binary
communication protocol) in Output Protocol.