Brother HL-5450DN Guida All'Installazione Rapida

Finish

Finish

Finish

Finish

Finish

Make sure that your computer is ON and you 

are logged on with Administrator rights.

If there are any programs running, close them.
The screens may differ depending on your 

operating system.

•
•

 Note
For Windows Vista

®

 and Windows

®

 7 users, 

when the 

User Account Control screen 

appears, click 

Allow or Yes.

If you want to install the PS driver (BR‑Script3 

printer driver), choose 

Custom Install and then 

follow the on‑screen instructions.
Depending on your security settings, a 

Windows

®

 Security or antivirus software window 

may appear when using the machine or its 

software. Please allow or permit the window to 

continue.
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is 

the most suitable driver for Windows Vista

®

 and 

Windows

®

 7 when printing from the applications 

that use the XML Paper Specification 

documents. Please download the latest driver 

by accessing the Brother Solutions Center at 

http://solutions.brother.com/.

•

•

•

•

Make sure your machine is connected to the 

power and your Macintosh is ON. You must be 

logged on with Administrator rights.

For users of Mac OS X 10.5.7 or lower, upgrade to 

Mac OS X 10.5.8 – 10.7.x. (For the latest drivers 

and information for the Mac OS X you are using, 

visit http://solutions.brother.com/.)

If you want to add the PS driver (BR‑Script3 

printer driver), please go to the Brother Solutions 

Center at http://solutions.brother.com/ and visit 

FAQ’s on your model page for instructions.

 Turn off the machine and make sure the USB or parallel interface 

cable is 

NOT connected to the machine. If you have already 

connected the cable, disconnect it.

 Put the installer CD‑ROM into your CD‑ROM drive. If prompted, select your 

model and language.

If the Brother screen does not appear automatically, go to 

My Computer (Computer), 

double‑click the CD‑ROM icon, and then double‑click 

start.exe.

 Click 

Install Printer Driver, and click Yes if you accept 

the license agreement.

 Follow the on‑screen instructions until this screen 

appears.

 Connect the USB cable to the USB port marked with the 

 symbol or the parallel cable to the parallel port on your 

machine, and then connect the 

cable to your computer.

  Turn the machine on, 

and follow the on‑screen 

instructions to complete 

setup.

If you are going to connect the machine 

to your network, we recommend that you 

contact your system administrator prior to 

installation.

TCP/IP

TCP/IP

a

Router

b

Machine

 Remove the protective cap from the 

Ethernet port marked with a 

 

symbol.

 Connect the network interface cable to the Ethernet 

port and then connect it to a free port on your hub.

 Make sure your machine’s power switch is on.

 Put the installer CD‑ROM into your CD‑ROM drive. If 

prompted, select your model and language.

If the Brother screen does not appear automatically, go to 

My Computer (Computer), double‑click the CD‑ROM icon, 

and then double‑click 

start.exe.

 Click 

Install Printer Driver, and click Yes if you 

accept the license agreement.

  Follow the on‑screen instructions to complete 

setup.

You can find your machine’s IP Address and the 

node name by printing out the Printer Settings Page. 

See Print the Printer Settings Page below.

TCP/IP

a

Client computer

b

Computer known as “Server” or “Print server”

c

TCP/IP or USB

d

Machine

 Put the installer CD‑ROM into your CD‑ROM drive. If prompted, select 

your model and language.

If the Brother screen does not appear automatically, go to 

(Computer), double‑click the CD‑ROM icon, and then double‑click start.exe.

 Click 

Install Printer Driver, and click Yes if you accept 

the license agreement.

 Follow the on‑screen instructions until this screen appears. Choose your machine’s 

queue, and then click 

OK.

 Follow the on‑screen 

instructions to complete 

setup.

 Connect the USB cable to the USB port marked with a 

 symbol 

on your machine, and then connect the cable to your Macintosh.

 Make sure your machine’s power switch is on.

 Double‑click the 

Start Here OSX icon. Follow the on‑screen instructions.

It may take a few minutes for the installation to 

complete.

 Put the installer CD‑ROM into your 

CD‑ROM drive.

 Choose your machine from the list, and then click 

OK.

  Click 

Next.

When the 

Brother Support screen 

appears, make your selection and 

follow the on‑screen instructions.

 Remove the protective cap from the 

Ethernet port marked with a 

 

symbol.

 Connect the network interface cable to the Ethernet 

port and then connect it to a free port on your hub.

 Make sure your machine’s power switch is on.

 Double‑click the 

Start Here OSX icon. Follow the on‑screen instructions.

It may take a few minutes for the installation to 

complete.

  Choose your machine from the list, and then click 

OK.

 Note
If there is more than one of the same model connected on 

your network, the MAC Address (Ethernet Address) will be 

displayed after the model name.
You can find your machine’s MAC Address (Ethernet 

Address) and IP Address by printing out the Printer 

Settings Page. See Print the Printer Settings Page below.

•

•

 Click 

Next.

When the 

Brother Support screen appears, 

make your selection and follow the on‑screen 

instructions.

 Put the installer CD‑ROM into your 

CD‑ROM drive.

Contact your administrator if you do 

not know the location or the name of 

the machine queue on the network.

Get inspired. If you’re using Windows

®

, double‑click the Brother 

CreativeCenter icon on your desktop to access our FREE web site with 

many ideas and resources for personal and professional use.

Mac users can access Brother CreativeCenter at this web address:

You can visit us at http://solutions.brother.com/ where you can get product support, the latest driver updates and utilities, 

and answers to frequently asked questions (FAQs) and technical questions.

The Printer Settings Page lists all the current printer settings, including network 

settings.

 Make sure that the front cover is closed and the power cord is plugged in.

 Turn on the machine and wait until the machine is in the Ready state.

 Press 

Go three times within 2 seconds. The machine will print the current 

printer settings page.

If the 

IP Address on the Printer Settings Page shows 0.0.0.0, wait for one minute and try 

again.

The Brother print server is equipped with a web server that allows you to monitor its 

status or change some of its configuration settings, using HTTP (Hyper Text Transfer 

Protocol).

We recommend Windows

®

 Internet Explorer

®

 7.0/8.0 or Firefox

®

 3.6 for Windows

®

 and 

Safari 4.0/5.0 for Macintosh. Please also make sure that JavaScript and Cookies are always 

enabled in whichever browser you use. To use a web browser, you will need to know the IP 

Address of the print server. The IP Address of the print server is listed on the Printer Settings 

Page.

You can reset the print server back to its default factory settings (resetting all information such as the password and 

IP address information).

 Turn off the machine.

 Make sure that the front cover is closed and the power cord is plugged in.

 Hold down 

Go as you turn on the power switch. Keep Go pressed down until all the LEDs light up and then 

Ready LED turns off.

 Release 

Go. Make sure that all the LEDs turn off.

 Press 

Go six times. Make sure that all the LEDs light up to indicate the print server has been reset to its factory 

default settings. The machine will restart.

 Open your browser.

 Type “http://machine’s IP address/” into your browser’s address bar (where 

“machine’s IP address” is the IP address of the Brother machine or the print server 

name).

For example: http://192.168.1.2/

If you have configured an optional login password, you must enter it when prompted to access 

the Web Based Management.

 For more information, see Web Based Management in the Network User’s Guide.

